Jump to content
SAU Community

Recommended Posts

1982 L20ET 4 door bog stock orginal R30.

one of the first to arrive in Aust over. Imaculate inteirior, and well kept motor but some panel damage.

HR30 GT 4dr

L20ET, dyno'd - 115kw @ wheels (totally stock, not even a cooler) 240k on the clock

blitz BOV, Pod Filter, 10mm custom leads thats it in the way of motor mods, all new leads, hoses, clamps, electrical connectors, alt, starter motor, radiator....(most things have simply been renewed/rebuilt to keep it fit, list too long so i won't go into it)

Lowered on a set of custom King springs, and adjustable Koni's

Rolling on 15inch Work, E-wing rims (70% tread on Yokohama C Drives) using standard 5 speed short box (rebuilt x 2) Exedy HD clutch

Motor very regularly serviced (every 5000km and always new filters)

standard brakes, just bendex ultra something pads.....

Very clean inside and under bonnet, just needs some panel love from someone who has the time.

Will be very sad to see her go but thems the breaks.

See my profile for photos

contact me on [email protected] or 0422455443

located in Melbourne

Make an offer!!

Link to comment
https://www.sau.com.au/forums/topic/287350-r30-4dr-import-for-sale/
Share on other sites

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

1982 L20ET 4 door bog stock orginal R30.

one of the first to arrive in Aust over. Imaculate inteirior, and well kept motor but some panel damage.

...

Hi,

Are you selling the car with RWC?

JH

Hi,

Are you selling the car with RWC?

JH

no RWC

but i can tell you what it would need...

washer bottle for wipers (i took it out when i move the air filter but still have the water pump/motor and hoses)

remote swich for the horn (the boss kit for the wheel doesn't meet the brass pin for the horn)

rear demister switch (it burnt out)

new fuse for the hazard lights (burnt out the other week i think)

don't have the time to run around to wreckers to grab those things at the moment but all would be easy to find and put in yourself

Profile photos are good but more photos might help: front, back, both sides, etc.

JH

I'll put some more up soon and link them to photobucket or something

F&ck sorry guys.... i do have a Job and now a new car to play with lol

got my hands on a camera today so if you're all good kids i'll put some up on Thursday!! (need to find a cable for it)

keep your pants on....

IMG_1670.jpg

clear coat f&cked but the boot is all straight

IMG_1671.jpg

bonnet straight, paint faded, front apron gone (had a slight hit to the front along time ago - no structural damage and just need new guards)

IMG_1672.jpg

bonnet faded

IMG_1673.jpg

right side - filler cap bit dinted, rear passenger door skin needed (all internal trims in fantastic condition), front guard bit dinted(can be beaten out but why bother a new guard cost's less than the labour), bonnet raised(air flow, not out of a line)

IMG_1674.jpg

door skin

IMG_1675.jpg

left side very straight and paint is good

IMG_1676.jpg

roof - no rust anywhere, sills cleaned regularly all seals in great condition, under side - top of all doors very clean and no rust

IMG_1677.jpg

rear left boot sills (tiny amount of surface rust about the size of a ten cent piece)

IMG_1678.jpg

rear right sill the same

IMG_1679.jpg

majchek you fool, as if 2 grand for an IMPORT R30... flamin engineers got no finance skills these days!

FYI wogsrus is responsible for injecting me with R30 poison as a young CAD draftie all those years ago.... he still gots the fever!

dave its still looking like I may move my hatch on in the near future... so keep me posted on progress

majchek you fool, as if 2 grand for an IMPORT R30... flamin engineers got no finance skills these days!

FYI wogsrus is responsible for injecting me with R30 poison as a young CAD draftie all those years ago.... he still gots the fever!

dave its still looking like I may move my hatch on in the near future... so keep me posted on progress

since i have the 2 cars now and can put the 30 off the road i'm going to start getting some (straight) panels and prime them up and slap em on. She'll look like a demo. derby car but i'll get in ready for some to paint..

it really doesn't need that much...

front quarters X 2

filler cap

right rear door and i'll just swap over the trims and prime it

R31 front and rear bars

then it would be ready to go to the painters to strip the rest of the panels back (some to bear metal and others just need to be scuffed back), primed, and painted..

estimating $3k cash to have the whole thing re sprayed (same colour and cost price)

Then i will be asking alot more cash for her unless someone buys it before i start

...front quarters X 2

Hi,

Where to get reasonable front quarter panels (and front apron) for an R30? The ones I've seen in wreckers (Clayton and Kilsythe) are usually damaged, body-filled or rusted?

JohnH 

Hi,

Where to get reasonable front quarter panels (and front apron) for an R30? The ones I've seen in wreckers (Clayton and Kilsythe) are usually damaged, body-filled or rusted?

JohnH 

there are plenty out there..

last time i was quoted $130-160 for straight clean undamaged panels.. and there are heaps out there.

front aprons are a bit harder to find and in my opinion look average even when they are in good condition that's why i'm going for an r31 front/rear bar

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...