Jump to content
SAU Community

Recommended Posts

Think I saw a Blitz Spec-R for $350ish in the for sale section..

EDIT: http://www.skylinesaustralia.com/forums/Bl...ol-t287994.html

I've got that one :P

Dual solenoid apparently holds boost better and I have no need for a boost gauge (never liked that rice shit) as it displays your boost/vacuum readings. Sitting on top of my steering column.

Edited by SKYRYAN

Turbo tech manual boost controller around 35$ delivered to ur door from ebay.

Some electronic boost controllers still creep or spike. So save ur money and get the cheap ball and spring one. Not like the plain bleed manual ones. They suck. Otherwise get a profec B if you are running a bigger turbo

Greddy Profec B are great, I run over 500hp and she never jumps over the selected boost and for under $500 these day's they are awesome, they also last ages to. HKS EVC-S are a good unit and also are the Blitz Units, these offer single and dual solenoid options. I've got all off them new dude so if you are interested chuck us a pm.

If your on a budget and not chasing huge power the manual one's are fine. I'd avoid china ebay spec one's, don't want that been the demise of your motor so you are better of looking for a trusted product like TurboSmart MBC.

Edited by monga

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
    • Mine is all -12, I’m running a dry sump in a billet block though 
×
×
  • Create New...