Jump to content
SAU Community

Recommended Posts

I have heard today that now cars can be impounded and penalty notice issued to driver. Previously my knowledge was that if a car was impounded driver was to be charged with relevent offence and brought before a court.

I heard this was to increase impound levels and speed up the process and clear courts up. If this is true I would expect a dramatic increase in impounds as all the work for police done at time, Compared to having to compile brief of evidence to court.

Link to comment
https://www.sau.com.au/forums/topic/288331-impounds/
Share on other sites

I think that is only related to the hoon law... if someone get caught hooning: burning tyres, drifting, excessive speed etc...

first offence car will be impounded for 24 hours, 2nd offence I think is a few days, 3rd offence car will be impounded forever, or crushed under the metal crusher...

nothing to do with increasing impound level. the driver is still gonna get a fine in the mail and still possibly go to court depending the severity of the offense.

hoon law has been around quite a number of years now, and many repeat offenders have had their cars crushed.

Link to comment
https://www.sau.com.au/forums/topic/288331-impounds/#findComment-4830692
Share on other sites

Oh dear... this will certainly make things a bit more ridiculous.

But honestly - not surprising. Once the laws are in, they always screw down harder and harder.

Politicians and chiefs... who needs em sometimes - bad bad decision

Link to comment
https://www.sau.com.au/forums/topic/288331-impounds/#findComment-4832140
Share on other sites

I have heard today that now cars can be impounded and penalty notice issued to driver. Previously my knowledge was that if a car was impounded driver was to be charged with relevent offence and brought before a court.

I heard this was to increase impound levels and speed up the process and clear courts up. If this is true I would expect a dramatic increase in impounds as all the work for police done at time, Compared to having to compile brief of evidence to court.

A friend of mine had his car impounded about 6 months ago, he got a fine on the spot and had to go to court as well.

Link to comment
https://www.sau.com.au/forums/topic/288331-impounds/#findComment-4832317
Share on other sites

time to put some blocks behind the loud pedal. . . .then there is no chance of being what the cops see as a 'hoon'

or buy an car with automatic gearbox and install a rev limiter set at 3000rpm..... the most you'll do in most cars with that rev is 110km/h on the freeway...

Link to comment
https://www.sau.com.au/forums/topic/288331-impounds/#findComment-4832382
Share on other sites

get a pushbike then... how fast can you go on that thing before falling over? :-)

A guy at Uni told me his friend got warned by a cop for riding his push bike too fast. So push bikes aren't completely immune from the might of the hoon laws :happy:

Link to comment
https://www.sau.com.au/forums/topic/288331-impounds/#findComment-4832444
Share on other sites

A guy at Uni told me his friend got warned by a cop for riding his push bike too fast. So push bikes aren't completely immune from the might of the hoon laws :happy:

might get booked for locking up the breaks or riding it in a ill manner. what about mobile phones and push bikes ?

Link to comment
https://www.sau.com.au/forums/topic/288331-impounds/#findComment-4832464
Share on other sites

Impound the bike and give him a canary for having a bald tire. ;)

Forgot to mention he was not wearing a helmet....

Link to comment
https://www.sau.com.au/forums/topic/288331-impounds/#findComment-4833162
Share on other sites

A guy at Uni told me his friend got warned by a cop for riding his push bike too fast. So push bikes aren't completely immune from the might of the hoon laws ;)

My mate got a $325 fine for exceeding the spedlimit on his pushbike, road rules still apply.

Also: Not one car has been crushed in Australia yet, I challenge someone to find one.....

Link to comment
https://www.sau.com.au/forums/topic/288331-impounds/#findComment-4833173
Share on other sites

^

With the government implementing 30km/h zones, shouldn't be that hard to exceed the limit with a good race push bike.

But how are you suppose to keep track of your speed on a push bike? Do the new ones come with speedos now?

Link to comment
https://www.sau.com.au/forums/topic/288331-impounds/#findComment-4833921
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...