Jump to content
SAU Community

8 Pot Ap Racing Calipers

BLUEGTR
 Share

Recommended Posts

BLUEGTR Community Regular

BLUEGTR

Posted
  • Author
Posted
I'll try and dig up the PDF/Part Numbers

I had a a pair of these but sold them...

That would be good mate cos I can't make out numbers on caliper all I can see is the cp part.

awesome set of calipers very nice price too !

do you have brackets ? disks ? to fit GTR ?

Sorry dont have brackets or disks.

Have more pics as well if any one is interested.

rocko1 Newbie

rocko1

Posted
Posted

I would be interested fitting these calipers to a circuit car,however i would need to know what

the min rotor diameter would need to be.Do you have any numbers on these monoblocks so i can

check for fitment

BLUEGTR Community Regular

BLUEGTR

Posted
  • Author
Posted
I would be interested fitting these calipers to a circuit car,however i would need to know what

the min rotor diameter would need to be.Do you have any numbers on these monoblocks so i can

check for fitment

sorry cant make out part numbers. min rotor size im not sure either i was just going to run 355mm rotors

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      98 R34GTT 4k engine stumble

      By MBS206 · Posted

      List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • tylink720
      "Cheap" bolt on turbo on RB25DET NEO

      By tylink720 · Posted

      @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • Watermouse
      "Cheap" bolt on turbo on RB25DET NEO

      By Watermouse · Posted

      https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • Kinkstaah
      Airbox for +T

      By Kinkstaah · Posted

      It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
×
×
  • Create New...