Jump to content
SAU Community

Recommended Posts

still have the entire car, i am tryn to sell it as a whole for another 4 days about... gearbox and engine if i can get a good offer on them i will seperate the car. any1 interested in coming to see them let me no.

rear brakes you can have them and steering colum cover i dont think any1 wants so that should b fine

seats may already selll sorry but if it falls through il let ya no.

turbo may stay with engine

and dan666 reverse lights were sprayed with tint, then i used metho and steel wool to get it off... they are ok but just letn ya no... i dunno if ud still want em... they aint to bad but yer...

thanks guys

dan666 reverse lights were sprayed with tint, then i used metho and steel wool to get it off... they are ok but just letn ya no... i dunno if ud still want em... they aint to bad but yer...

Hmm OK so they're a little rough then, well fire me a price to consider. A pic to my email (that I contacted you via) as well if that's possible.

thanks,

Dan

Daz035 I'm still interested in the gauges (along with a few other things)

Sent you a PM the other week but no reply .. whats the best way to speak to you? If you're after email addresses, hit me up on- therake (a) gmail dot com.

Thanks

  • 2 months later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...