Jump to content
SAU Community

Recommended Posts

Product-----Hankook Ventus Sport K104 tyres

Tyre size----235/45/17

Rim size-----9 inch

Vehicle------93 R32 GTR

Price--------$170 each

Location-----Brisbane / Queensland

Compared against-Yokohama AVS 245/45/17

------------------Falken Ziex 326 235/45/17

Overall Rating 9/10 ****

A couple of months ago I had to replace the tyres on my GTR. I was running Yokohama AVS 245/45/17 all round but due to a lot of negative camber they had worn out on one side after 10 000 K. I liked these tyres so priced some new ones and was quoted $360 each for equivalent replacements. As I had just spent a small fortune replacing all the brake rotors I knew the budget wasn't going to stretch that far this time around so I did some research for some less expensive ones. After a lot of debating I finally ended up with the Hankook Ventus K104 in a 235/45/17 size at each corner. I wasn't expecting much form them considering the price however I have been VERY pleasantly surprised by just how good they are. This is only the third set of tyres I have had on the car so I haven't a lot to compare against but these are the best of the bunch so far. First tyres were 235/45/17 Falken 326. These tyres are absolute rubbish!! Wouldn’t put them on any car that has any performance traits. Slippery in the dry dangerous in the wet (even with 4wd). They were supplied by the compliance so after about 1000k I got rid of them. They were replaced by the Yokohama's which are a great tyre but very noisy and the car tram lined very badly with them. On top of that they wore out very quickly.

The Hankook's are nice and quiet and have as much grip as the Yokohamas did (maybe more). They cured my tramlining completely and cost about half the price of the Yoko's. The wife will also now hop into the GTR because they are much more comfortable than either of the other two. They are not quite as good as the Yokohama's in the wet but this doesn't worry me much cos I feel if you are racing in the wet you're going to get in trouble anyway. Normal wet driving (not trying to get it sideways) is no problem. So there you have it a real bargain that sticks it the "big names". Oh and they are Y speed rated as well (300k/h). So if you have a R32 GTR and want some cheapies that have good performance you can't really go past them.

------------Price----Grip Dry----Grip Wet----Durability----Comfort

Falken--------6---------3-----------1---------- ?---------- 6

Yokohama----3---------8------------9----------4---------- 4

Hankook----- 9---------8.5----------7----------?-----------7

Thanks guys.

I got them throught a small dealer in Aspley. Not sure if I am allowed to give them a plug so PM me if you want to know. I didn't shop around once I made the decision to go with the Hankooks so I'm not sure if you can get better prices or not.

I know the 245/40/17 was a lot more expensive for the same tyre - around $240 I think.

I too have these not sure if they're the same model but do know they are hancook ventus.

they're definately the goods, will be getting them again

ps. duncan, I went in cicles for about 1 and a half hours following that link :D

oops, I meant:

http://www.skylinesaustralia.com/forums/sh...ead.php?t=28744

  • 1 year later...

Just bought four 235/45 17" Hankook K104s, since everyone is raving on about this particular tyre.

I havn't yet tested them in wet conditions but they seem like a very comfortable drive, and arn't noisy.

Got them from Jax, rang a few different stores and they all varied in prices! some had the tyres for $30 more!.. Got them for $169 each after some negotiations biggrin.gif also did my wheel alightment front and rears.

Seems like a good tyre so far.. they are rated Y grade and have silica compound too!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...