Jump to content
SAU Community

Recommended Posts

147rwkw RB25DE

"Amazing results with a nistuned Z32 computer modified to run the R33, this cheap alternative is conducted in house and retails for $1300 fitted and tuned, as the R33 computer is not a chippable board. the first run is standard setting with aftermarket exhaust 96.3 kw, then after a nistune chip and tune 121.5 kw! then a set of camshafts and a nice set ENVY Dyno vernier cam gears inlet and exhaust doing away with the variable valve timing showed amazing improvements @ 147 kw! thats almost the power of the turbo engine kids!!" copy paste from the vid URL

Edit: didnt let me embed

Edited by Super Drager
Link to comment
https://www.sau.com.au/forums/topic/289962-take-a-look-at-this-beast/
Share on other sites

Good effort, that'd be a fun drive.. total cost including all parts, labour and dyno?

My guess is if you throw that kind of coin at a gts-t you'd still be 100kw behind

Edited by madbung

Not sure on the total cost, but i suspect somewhere around the $4000 mark. Yeah thats true but for an N/A its a good effort.

Edit: Around 4k as its cams, camgears, nistune+tune etc etc someone correct me im probably way off.

Edited by Super Drager
just creamed a little bit...n/a powaaaah :D decent number....anyone seen any other n/a skylines pull big numbers?

Quite a few RB25DE's in the 120rwkw-130rwkw range but i've never seen one crack 200rwhp until tonight.

Quite a few RB25DE's in the 120rwkw-130rwkw range but i've never seen one crack 200rwhp until tonight.

actually you still haven't, LOL. he came about 3hp short.

and while it is a good effort for a NA, having thrown 4k of mods on has only gotten it to a point where a stock turbo would be.

also they don't have the car tied down very well (if at all) which would probably also increase the power reading. the reason i saw that is that the car moves around a little bit at about the 8 second mark in the video, and i have seen much more powerful cars than that move around less.

actually you still haven't, LOL. he came about 3hp short.

and while it is a good effort for a NA, having thrown 4k of mods on has only gotten it to a point where a stock turbo would be.

also they don't have the car tied down very well (if at all) which would probably also increase the power reading. the reason i saw that is that the car moves around a little bit at about the 8 second mark in the video, and i have seen much more powerful cars than that move around less.

MUST you ruin the fun? :(

Hey mate how much duration and lift were the cams?

And what is the maximum lift for an rb25de?

Cheers

Hey mate, i'm really not sure but i wouldn't expect them to be much different to Poncams.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...