Jump to content
SAU Community

Recommended Posts

Hey guys,

Just wondering if anyone has some coilpacks i could borrow to test out if my problem is indeed my coilpacks.

It's a series 1.5 so I would be looking for series 2 coilpacks, and if it is my coilpacks i'll go out and buy some splitfires.

I just want to avoid buying them if i don't need them.

I'm in the camberwell, ashburton area and would only need them for a night.

Thanks guys.

Link to comment
https://www.sau.com.au/forums/topic/290177-coilpakcs/
Share on other sites

ah damn i threw my coil packs for my seris two last week lol.

easy fix for you to test your coil packs is gake em out. give it a good clean and hit it with a thick coat of clear nail polish or some kind of silicon sealant. that will patch up any cracks your have on your coil packs as a temp fix and prrevent arking. if that fixes your problem then your coil packs are faulty

Link to comment
https://www.sau.com.au/forums/topic/290177-coilpakcs/#findComment-4856370
Share on other sites

What is the problem?

usually to diagnose you simply unplug each one @ idle. If the idle does not change, that is the dead pack as it should change if you unplug a good one :thumbsup:

Or you talking slight miss under load type of thing?

Link to comment
https://www.sau.com.au/forums/topic/290177-coilpakcs/#findComment-4856460
Share on other sites

I probably should've explained myself a little better.

I have another thread with an outline of the problem here http://www.skylinesaustralia.com/forums/Ca...29#entry4803129

Basically the car wont start and i've checked a lot of stuff. I think it's actually the ignition module inside the coil pack as apose to a crack in the coil pack.

When i tested it it would get an intimitant spark but was not very strong. Also the car would just about fire but not quite.

So i pretty much jsut want to see what happens when i just some new coil packs in with fresh ignition modules and hopefully that will solve it..

Thanks for any help guys.

Link to comment
https://www.sau.com.au/forums/topic/290177-coilpakcs/#findComment-4856938
Share on other sites

No problems Paul thanks for the input.

I just wanted to make sure i wasn't barking up the wrong tree.

If anyone has some i can borrow... literally for 30 mins or so i would greatly appreciate it.

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/290177-coilpakcs/#findComment-4857346
Share on other sites

Will either of you guys be around during the day today?

and how soon wold you need them back.

I could probably do a late night drop back.

I i'm Glen Iris, so camberwell, ashburton area where are you guys?

Link to comment
https://www.sau.com.au/forums/topic/290177-coilpakcs/#findComment-4857795
Share on other sites

Also pull your Coil Pack harness out and check it for any splits, mine had a few splits in it which was causing it to die under load at random times. Pulled the harness out and grabbed the Nitto and taped the whole harness. This fixed the issue instantly. Also check out teh eart on your battery, may be lose or shitty cable.

Link to comment
https://www.sau.com.au/forums/topic/290177-coilpakcs/#findComment-4871627
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I'd be worried about having to parallel park a boat like that. Magnificent car though.
    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
×
×
  • Create New...