Jump to content
SAU Community

Recommended Posts

r32 front CUSCO strut brace

round type.

$100

S13 coilovers

cusco zero 1

6 months old, perfect condition.

base height adjustable

helper springs

8/6 spring rate

excellent firm ride for street & track.

$1200

r32 kyb struts.

rear: BRAND NEW in box

$150

VLSD r32 manual.

5 bolt

good nick.

$120

(5 bolt shafts $80 extra)

cusco castor rods. suit s13 r32 180 z32 ect...

excellent nick. rrp at almost 400.

$230

NISMO rocker arm stoppers

used, in perfect nick. (150+ rrp)

$60

s13 carbon fibre dash cluster.

not genine cf but couldnt tell the diference.

$115

power fc boost control kit

in good nick, a couple wires cut but nothing hard to do back up

$300

power fc hand controller. full list of models it suits is in another thread of mine.

$300 neg

all pictures please go here:

http://www.nissansilvia.com.au/forums/inde...p;#entry5426192

Link to comment
https://www.sau.com.au/forums/topic/290300-jap-stuff/
Share on other sites

yo interested in the strut braces, where are u located?

located in adelaide SA.

i had it up there but it got deleted.

ill send out a photo of the ras and im more than happy to post items.

my contact number is 0422 905 956

much better reaching me on that

Link to comment
https://www.sau.com.au/forums/topic/290300-jap-stuff/#findComment-4859894
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...