Jump to content
SAU Community

Recommended Posts

wonder if commodores get hassled as much as imports? ...notice this one every day on my way to work....straight pipe exhaust that roars and pops so loud it wakes the dead...and the car has been lowered by what I can only think are cut springs that even the stock 15inch wheels are tucking rubber...i say its cut springs coz u can see the car bobbing around on fairly even road.

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

Congrats on the outcome storm

Hanaldo how did you go about getting reimbursed?

I just went to the police station with the papers from my sticker as well as a note from the inspector at the pits backing up my story, told them i had been stickered by this officer and when i went to the pits the inspector had laughed at what was on there. I said i wanted to know why i had to pay almost $100 for a perfectly legal car to be inspected, when the policemen that yellowed me had claimed themselves experts. Kicked up a huge fuss about it and demanded to speak to the officers that had given me the sticker. Waited around for them to come back from duty, and then when i questioned the guy about it he admitted that he had been wrong and was not actually aware of what was defectable. He thought my HID ballasts were a NOS system just as an example of his 'expert knowledge'. Not too mention he questioned the factory "S" badge on the bonnet, and tried to tell me that either i had put the badge on myself which he claimed is illegal, or i had an aftermarket bonnet which is also illegal :( Intelligent man...

So anyway, after all this arguing they agreed i was correct, and a few weeks later cheque arrived in the mail :P Not really sure if the money was worth all the effort, but i was more after getting one over the traffic-bullies. Tell you what, a win felt good :P

P.S. Also congrats on the outcome Storm, always good to get justice :(

I just went to the police station with the papers from my sticker as well as a note from the inspector at the pits backing up my story, told them i had been stickered by this officer and when i went to the pits the inspector had laughed at what was on there. I said i wanted to know why i had to pay almost $100 for a perfectly legal car to be inspected, when the policemen that yellowed me had claimed themselves experts. Kicked up a huge fuss about it and demanded to speak to the officers that had given me the sticker. Waited around for them to come back from duty, and then when i questioned the guy about it he admitted that he had been wrong and was not actually aware of what was defectable. He thought my HID ballasts were a NOS system just as an example of his 'expert knowledge'. Not too mention he questioned the factory "S" badge on the bonnet, and tried to tell me that either i had put the badge on myself which he claimed is illegal, or i had an aftermarket bonnet which is also illegal :( Intelligent man...

So anyway, after all this arguing they agreed i was correct, and a few weeks later cheque arrived in the mail :P Not really sure if the money was worth all the effort, but i was more after getting one over the traffic-bullies. Tell you what, a win felt good :P

P.S. Also congrats on the outcome Storm, always good to get justice :(

It's always good to have a win, espceially when your in the right.

Well done.

What you have done there Chris just proves that if you are willing to fight it, at the end of the day you will usually win due to the fact that you were doing nothing wrong and had a perfectly roadworthy car :whistling:

lately ive actually seen alot of yellow stickers on worthy cars. bunky fiestas, holdens etc. It brings a smile to my face, unlike when i see a clean and awesome import stickered up.

yes. shame on those people who are too busy trying to make ends meet and not purposely going out of their way to break the law.

yes. shame on those people who are too busy trying to make ends meet and not purposely going out of their way to break the law.

i think your being sarcastic (i hope) but ends will be harder to meet if you have an accident from crappy tyres and injure yourself and cannot work.

So, just to clarify... There's a nice inspector at Osbourne Park? :)

I've just had my third inspection for my sticker, and every time I've been, I've fixed my list up and they've decided that the previous inspector has made an error. Today I had some fat prick sit on my bonnet and jump up and down and claim that I didn't have any suspension. When I told him I could see it moving underneath him and (of course) I have suspension he just shrugged, wrote me another sticker, and said if I didn't have it off in two weeks I'd lose my number plates because I was forbidden any further extentions.....

Could seriously have cried hehe, next week will be my fourth attempt, after two sets of suspension and having adjusted one of them once. :/

^ Get your dad/mum to bring it down. Works a charm....

Did that with old R32 GTS4 - dad brought it down twice. 1st time stock suspension front right stuffed, replaced with full set of rock hard billsteins. Dad returned and same inspector passed him....

Edited by Ten Four
wonder if commodores get hassled as much as imports? ...notice this one every day on my way to work....straight pipe exhaust that roars and pops so loud it wakes the dead...and the car has been lowered by what I can only think are cut springs that even the stock 15inch wheels are tucking rubber...i say its cut springs coz u can see the car bobbing around on fairly even road.

yea man commo's get hassled as well if they're slammed and loud..

most of the time its more how they see you drive the car.. and if they think you look like a dickhead i guess haha

Edited by ohno1
My mum got spotted driving my 34 once. was lol.

She took it into pits wearing low cut top.

all that needed replacing was front caster arm bushes :ermm:

best mum ever.

Did you tell her that, or was it her idea? :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Had a go at the stuck crush tube this afternoon. Tried things like grips and a chain wrench first but wouldn't just twist straight off. So got to work with a drill. Started small and kept a depth stop on to make sure I didn't drill into the bolt. Made a line of drill holes all the way up and enlarged them. Then a combination of chisel and Dremel to split it all the way up. Levered the split to get oil in there and eventually it gave a bit while levering. Worked it back and forth with loads more oil till it was spinning freely, then with grips I could work it downwards and off. And no significant damage to the bolt (not by me anyway - just the 27 years of rust)
    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
×
×
  • Create New...