Jump to content
SAU Community

Recommended Posts

alright i just reasonly bought a 32 gtr..

well the problem with my car is smoke just keep coming out from the exhaust really bad every timee i step onto the pedals?? why that does it mean the turbo stuff how would i no this becos i am getting lagg from it aswell or is the engine stuff piston ring or some thing please help??

should i get a compression test done or gettting it tune will help?

Link to comment
https://www.sau.com.au/forums/topic/290578-i-got-a-blue-grey-smoke-guys/
Share on other sites

It can be either the turbos or the motor.

If your lucky, the turbo(s) have done an oil seal and oil+exhaust heat like that of the turbo = blue smoke. U will have to get your turbo(s) rebuilt or purchase some other ones.

Otherwise it can be your rings and thats more costly.

A tune will not help the situation, blue smoke always = oil.

It would be wise to get it to a mechanic on a tilt tray or off boost if you are unsure, they would probably be able to diagnose the issue for you easily.

When you say lag, what are you comparing to? If you just bought the car how do you know if thats not how the car drives?

alright i just reasonly bought a 32 gtr..

well the problem with my car is smoke just keep coming out from the exhaust really bad every timee i step onto the pedals?? why that does it mean the turbo stuff how would i no this becos i am getting lagg from it aswell or is the engine stuff piston ring or some thing please help??

should i get a compression test done or gettting it tune will help?

Why did you buy it if it was smoking? Didnt you notice the smoke wen test driving it? Or did this just very recently happen

It can be either the turbos or the motor.

If your lucky, the turbo(s) have done an oil seal and oil+exhaust heat like that of the turbo = blue smoke. U will have to get your turbo(s) rebuilt or purchase some other ones.

Otherwise it can be your rings and thats more costly.

A tune will not help the situation, blue smoke always = oil.

It would be wise to get it to a mechanic on a tilt tray or off boost if you are unsure, they would probably be able to diagnose the issue for you easily.

When you say lag, what are you comparing to? If you just bought the car how do you know if thats not how the car drives?

l

my car gone worst!!

i just went for a drive an this is how it went to answer your qustion.../

when you said lag... its feel like the turbo doesnt want to spin an smoke are coming out like crzy is that the problem or the piston problem?

i couldnt get to third gear becos there was tooo much smoke coming out. answer bk please man i wana noe so i can fix it. thx man if u can help me fine out the problem ur a legend!

when i bought the car its didnt do this that why i bought it. it look healthy when i got it!!

so yeah man im not that stupid if it did looking like that. when you c this car you would get it aswel for good price!

when i bought the car its didnt do this that why i bought it. it look healthy when i got it!!

so yeah man im not that stupid if it did looking like that. when you c this car you would get it aswel for good price!

Im not saying ur intellectually challenged bro,,but i think the problem may hav been there before u bought the car..hence the good price u must hav got it for

I think the seller saw you comin'

I think the seller could smell the cash

I think the seller has bolted

What city are you in? You'll need some expert help. Do you have any more moolah in the kitty for repairs?

I think the seller saw you comin'

I think the seller could smell the cash

I think the seller has bolted

What city are you in? You'll need some expert help. Do you have any more moolah in the kitty for repairs?

im in victoria what about you?

I would definitely scan the Victoria Subforum for technicians who they recommend as being trustworthy to get your GT-R up to speed.

I wonder if there is more than one problem; and this worries me a bit.

Get back to us pls.

l

my car gone worst!!

i just went for a drive an this is how it went to answer your qustion.../

when you said lag... its feel like the turbo doesnt want to spin an smoke are coming out like crzy is that the problem or the piston problem?

i couldnt get to third gear becos there was tooo much smoke coming out. answer bk please man i wana noe so i can fix it. thx man if u can help me fine out the problem ur a legend!

when i bought the car its didnt do this that why i bought it. it look healthy when i got it!!

so yeah man im not that stupid if it did looking like that. when you c this car you would get it aswel for good price!

well if it were me, id be taking off the dump pipe from the back of the turbos and checking if you still have all the fins on the turbos, I would also be taking off the intake pipes and checking the front of the turbos (where they suck in air) if its got lots of oil... if either of these things are true then its more then likely ur turbos. I would also do a compression test on the motor to be safe.... and if i didnt know how to do/check any of these things it would be straight to a reputable mechanic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...