Jump to content
SAU Community

Afm Readin 100% 5.1v On Ignition

SXY_33

By SXY_33,
in Engines & Forced Induction

 Share

Recommended Posts

SXY_33 Collaborator

SXY_33

Posted
Posted

Hey guys,

the other day i was was soldering my z32 afm plug onto my series 2 r33. this is wat i connected:

original Afm------------------Car-----------------------z32 (markings)

1-----------------------Orange + Blue-------------------- (B) signal

2-----------------------Blue + White---------------- © + (D) Joined the two ground wires.

3-----------------------Black + White------------------- (E) 12v

while i was soldering my lil sister decided to turn the key to ignition (coz she likes the blue lights on the cd player) so some of the wires touched, but i heard no noises, i pulled the key out and continued, figured the worst that could happen was a busted fuse.

when i finished i pluged in my z32 and turned the key to ignition, and my safc2 is reading 100% airflow, so i plug in the ecutalk cable and it too is showing 5.1v which i thought was wierd as the car is off. so i try turn it on n nothing, it just wont turn over. sometimes it almost does but. so i solder back the stock afm, thinking maybe the z32 is faulty but i hav the same problem.

i checkd all the fuses under the dash and they r all fine. then i thought it might be the ECU. so i tried turning the car on without an afm connected n it starts. it idles round 1100rpm and sounds normal for a cold start.

ive double and triple checked the wiring and its correct according to every wiring diagram i can find on the net. i plan to put a z32 ecu with a nistune board, but dont want to continue without solving this problem.

any suggestions would be greatly appreciated. its just doing my head it!

Link to comment
https://www.sau.com.au/forums/topic/290680-afm-readin-100-51v-on-ignition/
Share on other sites
SXY_33 Collaborator

SXY_33

Posted
  • Author
Posted

yep was the ecu. took it out n opened it up, checked the pinout n founf the afm pin, and sure enough there were burn marks on the ecu. got a z32 and hopefully wont take too long to get the nistune fitted.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • Dose Pipe Sutututu
      Unpeeling the Orange

      By Dose Pipe Sutututu · Posted

      When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • Kinkstaah
      Unpeeling the Orange

      By Kinkstaah · Posted

      This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Dose Pipe Sutututu
      RB20DE NEO smallbox clutch.

      By Dose Pipe Sutututu · Posted

      Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...