Jump to content
SAU Community

Recommended Posts

hey guys, we are selling off a few performance parts, that were going to be used, but have changed direction yet again... so up for grabs, is an assortment of japan's finest aftermarket parts (apart from the supertech springs which rival them) prices are all firm, if they seem unreasonable to you, we don't really want to hear about it... remember everything is new, apart from those which state that they are not...

only have some pics at the moment, will have all up over the weekend... located on the far north coast NSW, postage is available at an extra cost too.

rb26 apexi v-max camshafts 11.2mm lift, 260 duration $1200

rb26 apexi v-max lifters (these are needed with the cams due to the smaller base circle) (used for a short period of time with other apexi cams) $400

greddy fuel pressure gauge with all necessary wiring sensors etc (used in very good condition $250

greddy exhaust temp gauge, with all wiring and sensors (used in excellent condition) $250

rb26 tomei cam gears (only slightly used) $450

hks turbo timer (good condition, previously used, comes with r32 gtr loom adaptor) $80

rb26 supertech double valve springs and titanium retainers $750

post-56395-12550000353332_thumb.jpg , post-56395-1255001030006_thumb.jpg , post-56395-12550010709009_thumb.jpg

rb26 ferrea +1mm oversize valves (exhaust and intake) $650

post-56395-12550012169597_thumb.jpg , post-56395-12550012790052_thumb.jpg , post-56395-1255001387547_thumb.jpg , post-56395-12550014196299_thumb.jpg

rb26 ferrea collets (only have 24) $120

post-56395-12550013540591_thumb.jpg

rb26 ferrea double valve spring seats (have 24) $120 (see above for pic)

greddy single turbo y-pipe (the one with 2 inlets and a return for a bov) (has also had extensive work inside to improve flow characteristics slightly) $320

post-56395-12550015752596_thumb.jpg , post-56395-12550016881965_thumb.jpg

hks supper dragger muffler (4in intake, 5in tip) absolutely beautiful muffler, has been used $450

post-56395-12550015004436_thumb.jpg , post-56395-12550016348845_thumb.jpg

rb26 polished Cam angle sensor (also have a polish cas mount to come with it) $250

post-56395-12550017658023_thumb.jpg

rb26 polished camshaft covers, polished cam gear cover and polished coilpack cover $900

post-56395-12550020640822_thumb.jpg

rb26 polished twin turbo pipe, has also been extensively worked inside too. $150

post-56395-12550021440439_thumb.jpg

rb26 genuine nissan injector resistor pack $160

post-56395-12550021958799_thumb.jpg

also forgot to mention, we will consider trading for items that we need, of equivalent value...

they include: power fc and hand controller, ati or ross harmonic balancer, lightweight over driven (pref greddy) pulley, rose jointed suspension arms for r32 gtr, sparco racing bucket seats (fixed back), hks exhaust cam (272 9.6mm), hks cam gears, tomei h-beam rods, arp head studs, acl bearings (or cosworth), dry sump set up, hks oil cooler, etc

if you have any of these, just let us know, and its condition (with pics of your actual item please)

we are yet to finalise our next set-up so let us know if you have anything different

cheers guys.

  • 2 weeks later...
how many kms has the cas done

it came off a motor which had done 70,000k's mate, quite happy for you to test it before buying...

cheers

  • 2 weeks later...

bump,

have a few more things for sale...

polished greddy (genuine) rb26 plenum... polished exterior, ported insides.... $1400 , these sell new for $1200+, and the polishing and porting cost alot...

ported injector assembly plate (the one that bolts between the head and tb's) $450

r33 v-spec turbo's with a genuine 17,000k's on them... $450

also have a standard rb26dett harmonic balancer in great condition, only removing to replace with an ati one... $200

will have some more pics up soon... some quicker upon request, and upon very genuine inquiries...

cheers

have an apexi powerfc w/ hand controller, still in box, never used, no tune on it. consider swap for tomei cam gears, ferrea double valves springs w/ retainers and the ferrea seats?

have an apexi powerfc w/ hand controller, still in box, never used, no tune on it. consider swap for tomei cam gears, ferrea double valves springs w/ retainers and the ferrea seats?

PM sent a while ago, and no reply??? please people if you are interested reply, if not don't bother. thanks

  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Why are people so insistent on making dirty water?!
    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...