Jump to content
SAU Community

Recommended Posts

hey guys, we are selling off a few performance parts, that were going to be used, but have changed direction yet again... so up for grabs, is an assortment of japan's finest aftermarket parts (apart from the supertech springs which rival them) prices are all firm, if they seem unreasonable to you, we don't really want to hear about it... remember everything is new, apart from those which state that they are not...

only have some pics at the moment, will have all up over the weekend... located on the far north coast NSW, postage is available at an extra cost too.

rb26 apexi v-max camshafts 11.2mm lift, 260 duration $1200

rb26 apexi v-max lifters (these are needed with the cams due to the smaller base circle) (used for a short period of time with other apexi cams) $400

greddy fuel pressure gauge with all necessary wiring sensors etc (used in very good condition $250

greddy exhaust temp gauge, with all wiring and sensors (used in excellent condition) $250

rb26 tomei cam gears (only slightly used) $450

hks turbo timer (good condition, previously used, comes with r32 gtr loom adaptor) $80

rb26 supertech double valve springs and titanium retainers $750

post-56395-12550000353332_thumb.jpg , post-56395-1255001030006_thumb.jpg , post-56395-12550010709009_thumb.jpg

rb26 ferrea +1mm oversize valves (exhaust and intake) $650

post-56395-12550012169597_thumb.jpg , post-56395-12550012790052_thumb.jpg , post-56395-1255001387547_thumb.jpg , post-56395-12550014196299_thumb.jpg

rb26 ferrea collets (only have 24) $120

post-56395-12550013540591_thumb.jpg

rb26 ferrea double valve spring seats (have 24) $120 (see above for pic)

greddy single turbo y-pipe (the one with 2 inlets and a return for a bov) (has also had extensive work inside to improve flow characteristics slightly) $320

post-56395-12550015752596_thumb.jpg , post-56395-12550016881965_thumb.jpg

hks supper dragger muffler (4in intake, 5in tip) absolutely beautiful muffler, has been used $450

post-56395-12550015004436_thumb.jpg , post-56395-12550016348845_thumb.jpg

rb26 polished Cam angle sensor (also have a polish cas mount to come with it) $250

post-56395-12550017658023_thumb.jpg

rb26 polished camshaft covers, polished cam gear cover and polished coilpack cover $900

post-56395-12550020640822_thumb.jpg

rb26 polished twin turbo pipe, has also been extensively worked inside too. $150

post-56395-12550021440439_thumb.jpg

rb26 genuine nissan injector resistor pack $160

post-56395-12550021958799_thumb.jpg

also forgot to mention, we will consider trading for items that we need, of equivalent value...

they include: power fc and hand controller, ati or ross harmonic balancer, lightweight over driven (pref greddy) pulley, rose jointed suspension arms for r32 gtr, sparco racing bucket seats (fixed back), hks exhaust cam (272 9.6mm), hks cam gears, tomei h-beam rods, arp head studs, acl bearings (or cosworth), dry sump set up, hks oil cooler, etc

if you have any of these, just let us know, and its condition (with pics of your actual item please)

we are yet to finalise our next set-up so let us know if you have anything different

cheers guys.

  • 2 weeks later...
how many kms has the cas done

it came off a motor which had done 70,000k's mate, quite happy for you to test it before buying...

cheers

  • 2 weeks later...

bump,

have a few more things for sale...

polished greddy (genuine) rb26 plenum... polished exterior, ported insides.... $1400 , these sell new for $1200+, and the polishing and porting cost alot...

ported injector assembly plate (the one that bolts between the head and tb's) $450

r33 v-spec turbo's with a genuine 17,000k's on them... $450

also have a standard rb26dett harmonic balancer in great condition, only removing to replace with an ati one... $200

will have some more pics up soon... some quicker upon request, and upon very genuine inquiries...

cheers

have an apexi powerfc w/ hand controller, still in box, never used, no tune on it. consider swap for tomei cam gears, ferrea double valves springs w/ retainers and the ferrea seats?

have an apexi powerfc w/ hand controller, still in box, never used, no tune on it. consider swap for tomei cam gears, ferrea double valves springs w/ retainers and the ferrea seats?

PM sent a while ago, and no reply??? please people if you are interested reply, if not don't bother. thanks

  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • That is surely the biggest gathering of Stageas in North America, ever!
    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...