Jump to content
SAU Community

Recommended Posts

hey guys, we are selling off a few performance parts, that were going to be used, but have changed direction yet again... so up for grabs, is an assortment of japan's finest aftermarket parts (apart from the supertech springs which rival them) prices are all firm, if they seem unreasonable to you, we don't really want to hear about it... remember everything is new, apart from those which state that they are not...

only have some pics at the moment, will have all up over the weekend... located on the far north coast NSW, postage is available at an extra cost too.

rb26 apexi v-max camshafts 11.2mm lift, 260 duration $1200

rb26 apexi v-max lifters (these are needed with the cams due to the smaller base circle) (used for a short period of time with other apexi cams) $400

greddy fuel pressure gauge with all necessary wiring sensors etc (used in very good condition $250

greddy exhaust temp gauge, with all wiring and sensors (used in excellent condition) $250

rb26 tomei cam gears (only slightly used) $450

hks turbo timer (good condition, previously used, comes with r32 gtr loom adaptor) $80

rb26 supertech double valve springs and titanium retainers $750

post-56395-12550000353332_thumb.jpg , post-56395-1255001030006_thumb.jpg , post-56395-12550010709009_thumb.jpg

rb26 ferrea +1mm oversize valves (exhaust and intake) $650

post-56395-12550012169597_thumb.jpg , post-56395-12550012790052_thumb.jpg , post-56395-1255001387547_thumb.jpg , post-56395-12550014196299_thumb.jpg

rb26 ferrea collets (only have 24) $120

post-56395-12550013540591_thumb.jpg

rb26 ferrea double valve spring seats (have 24) $120 (see above for pic)

greddy single turbo y-pipe (the one with 2 inlets and a return for a bov) (has also had extensive work inside to improve flow characteristics slightly) $320

post-56395-12550015752596_thumb.jpg , post-56395-12550016881965_thumb.jpg

hks supper dragger muffler (4in intake, 5in tip) absolutely beautiful muffler, has been used $450

post-56395-12550015004436_thumb.jpg , post-56395-12550016348845_thumb.jpg

rb26 polished Cam angle sensor (also have a polish cas mount to come with it) $250

post-56395-12550017658023_thumb.jpg

rb26 polished camshaft covers, polished cam gear cover and polished coilpack cover $900

post-56395-12550020640822_thumb.jpg

rb26 polished twin turbo pipe, has also been extensively worked inside too. $150

post-56395-12550021440439_thumb.jpg

rb26 genuine nissan injector resistor pack $160

post-56395-12550021958799_thumb.jpg

also forgot to mention, we will consider trading for items that we need, of equivalent value...

they include: power fc and hand controller, ati or ross harmonic balancer, lightweight over driven (pref greddy) pulley, rose jointed suspension arms for r32 gtr, sparco racing bucket seats (fixed back), hks exhaust cam (272 9.6mm), hks cam gears, tomei h-beam rods, arp head studs, acl bearings (or cosworth), dry sump set up, hks oil cooler, etc

if you have any of these, just let us know, and its condition (with pics of your actual item please)

we are yet to finalise our next set-up so let us know if you have anything different

cheers guys.

  • 2 weeks later...
how many kms has the cas done

it came off a motor which had done 70,000k's mate, quite happy for you to test it before buying...

cheers

  • 2 weeks later...

bump,

have a few more things for sale...

polished greddy (genuine) rb26 plenum... polished exterior, ported insides.... $1400 , these sell new for $1200+, and the polishing and porting cost alot...

ported injector assembly plate (the one that bolts between the head and tb's) $450

r33 v-spec turbo's with a genuine 17,000k's on them... $450

also have a standard rb26dett harmonic balancer in great condition, only removing to replace with an ati one... $200

will have some more pics up soon... some quicker upon request, and upon very genuine inquiries...

cheers

have an apexi powerfc w/ hand controller, still in box, never used, no tune on it. consider swap for tomei cam gears, ferrea double valves springs w/ retainers and the ferrea seats?

have an apexi powerfc w/ hand controller, still in box, never used, no tune on it. consider swap for tomei cam gears, ferrea double valves springs w/ retainers and the ferrea seats?

PM sent a while ago, and no reply??? please people if you are interested reply, if not don't bother. thanks

  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...