Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

R32 GTS.T wheels go alright on a GT-R while I get mine repainted yeah? I'm 90% sure caliper clearance wont be an issue being that my car doesn't have the Brembo's

you may have to run slip on spacers on the front, because GTS-T rims on a GTS-T have about 4mm caliper clearance...

lil help, just took the gtr to work and was running fine.

till i tried to put my foot down just the slightest bit and i it didnt wanna boost, was nearly at work so i kept going and yeah it didnt wanna go above 3k. i had it in first has i pulled into the car park and was sitting around the 3k mark seeing if it would go over and it gave the loudest back fire ive heard outa that exhaust. im assuming the extra fuel i was dumping in built up. all the temps seemed fine. it also stalled while i was looking under the bonet after sitting at low rpm for a while.

almost seems like a intercooler hose has come off like once before, had a quick look when i come in but seems to be alright uptop, im going to head out there and jack it up at lunch and try n have a good look at those intercooler hoses.

is there anything else i should be checking? maybe split hoses or something.

damn cars

Edited by Inline 6
you may have to run slip on spacers on the front, because GTS-T rims on a GTS-T have about 4mm caliper clearance...

Ive got gts t rims on my gtr at the moment cause i had to go through regency and they fit fine no spacer required...

Cars off defect..... Not one issue.... :banana:

Weezy thanks for lending me that cat. i'll drop it back to ya probabbly sunday arvo/evening after i change everything back over

Cars off defect..... Not one issue.... :banana:

Weezy thanks for lending me that cat. i'll drop it back to ya probabbly sunday arvo/evening after i change everything back over

when you get the cat you bought of ebay installed right mikey ;)

Edited by Inline 6
lil help, just took the gtr to work and was running fine.

till i tried to put my foot down just the slightest bit and i it didnt wanna boost, was nearly at work so i kept going and yeah it didnt wanna go above 3k. i had it in first has i pulled into the car park and was sitting around the 3k mark seeing if it would go over and it gave the loudest back fire ive heard outa that exhaust. im assuming the extra fuel i was dumping in built up. all the temps seemed fine. it also stalled while i was looking under the bonet after sitting at low rpm for a while.

almost seems like a intercooler hose has come off like once before, had a quick look when i come in but seems to be alright uptop, im going to head out there and jack it up at lunch and try n have a good look at those intercooler hoses.

is there anything else i should be checking? maybe split hoses or something.

damn cars

+1 for a cooler joins. Was it pufing abit of black smoke too?

Ive got gts t rims on my gtr at the moment cause i had to go through regency and they fit fine no spacer required...

Cars off defect..... Not one issue.... :banana:

Weezy thanks for lending me that cat. i'll drop it back to ya probabbly sunday arvo/evening after i change everything back over

No worries brother, just make sure you send me a text or something before you come over just so I can 100% make sure I am home. Congrats for getting off defect with little fuck around ;)

No worries brother, just make sure you send me a text or something before you come over just so I can 100% make sure I am home. Congrats for getting off defect with little fuck around :banana:

Yeah i'll text ya during the day once i have finished with the car.

Yeah the guy at the lonsdale depo was pretty cool was in and out in 20mins....

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
    • Hey mate, really appreciate the help. Have been looking pretty extensively myself and was certain they were retro fitted, but then ended up finding a 4 door with what looks like the same side skirts or at least the closest I’ve seen. The photos from the Offset Kings event at Sunrise 2016. https://fatlace.com/offset-kings-okayama-at-sunrise/
×
×
  • Create New...