Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

really ghetto initially. basically got L brackets from bunnings and bolted them to the seat. then where they lined up on the rail, drilled and bolted them on

make sure u get strong ones though

I'll race ya with the nitro R32 up to 50km/h, it could go up faster but launch is super quick due to it's light weight AWD making it a quick win :cool:

electric is faster :bunny:

I was running a mamba brushless combo and a 3s lipo and was seeing speeds around 100kph with foam tyers. Im also running a Team losi truck with a Sidewinder 5700kv combo and 2s lipo and im hitting speeds around 70kph with offroad tyers.

Quick update on the 26.

The loom is off the motor, aswell as the plenum. Need to organise a small crack in the plenum to be welded up and then strip it down with paint stripper and get it looking like new. Will be replacing all hoses with black silicon ones and getting new intake gaskets.

I picked up the rc car with the S15 shell at hobby habits on main north, the 34 shell at hobby habit daws road and the 32 shell on ebay, I also got an R34 shell that my girlfriend painted a charmeleon purple green colour lol I so wouldnt mind them 1:10 scaled Work Meister or XSA mmmmm

Dave, I was originally going to go for another electric and eventually whack a mamba max in there but couldnt resist trying out the nitro - the noise and the smoke is awesome. I could whack a mamba into the associated 1:18 I got but searching around apparently it doesnt stay on the ground because its too small/light :cool:

That R32 shell only just came in the mail today so its fresh and clean... and then it'll just end up like my S15 shell after it's first tank lol

the middle R34 shell will go on an electric one eventually :rofl:

Did you get your models from Hobby Habit?

also..just dial in some camber..always fun there!

thats it there..on the camera phone.

haha me, scott and adrian have 1:10 electric drift cars, farkin fun, havent taken mine out of the shed in a while tho. I have a 32 gtr shell, Blitz R34 drift shell, AE86 panda spec shell and an S15 :(

Whatever you do, grease up the driveshafts, the front ones are farking expensive!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...