Jump to content
SAU Community

Recommended Posts

Nah got the pump priming. Doesn't even come close to firing up though, just turns over for a bit while draining the shit out of the battery, even when being jumped and the other car is revving a fair bit, it still almost dies completely.

My mate said he could hear the fuel being pumped into the rail, so it might be a spark issue, but I really don't give a fuck anymore. It's time for someone who knows what they're doing re wiring to have a suss (that or it's time to push the cunt over a cliff and gleefully watch the destruction that ensues)

Edited by AndrewJZX100
  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

Brand new plates too Mitch :D

o noez haha

Yo Donkey Kong, you should buy my KTS Tie Rod ends - increase steering lock = fully sick hectik driftz :)

sorry peach , if im gonna buy anything for lock it will be drift knuckles

Can you check for spark? Remove one of the coil packs and stick in a spark plug ... crank it over and check for spark? Or timing light if you have one.

:)

I just can't stand to look at the thing at the moment. My mates dad has a multi-meter but none of us who are working on it have a clue about wiring so I guess we've done pretty well to get this far with all the bullshit little differences/problems we've encountered :D

One thing though, Nissan can suck a huge wang. Why the hell would you make every single goddam sensor have a different plug between 2 engines of the same vintage fitted to similar chassis?

UUUGGGHHHH marry me Andrew??

im right there with ya mate, couldnt even get the RB on the engine mounts today,

and Dale needed the crane back ASAP, si i dropped it onto one mount just so its in there

ill take it to a shop and let some other douche deal with it.

between work, My Boy and other duties, i no longer have the time of patience anymore.

FCKING CARS!!!!

gonna do the worlds biggest skid when its done i swear!

UUUGGGHHHH marry me Andrew??

im right there with ya mate, couldnt even get the RB on the engine mounts today,

and Dale needed the crane back ASAP, si i dropped it onto one mount just so its in there

ill take it to a shop and let some other douche deal with it.

between work, My Boy and other duties, i no longer have the time of patience anymore.

FCKING CARS!!!!

gonna do the worlds biggest skid when its done i swear!

LOL we've both come to the same conclusion - some other sucka can deal with it :D

Tandem skids when both our shitboxes are done fo sho.

It wouldn't be so bad if the end result was some bullshit tough motor, but all this shit for a 20? :D

Nah in all honesty mine wouldn'tve been half the headfuck it has if me and my mate didn't make an important decision re how to swap looms while absolutely plastered last weekend :) that was where the real troubles began.

It wouldn't be so bad if the end result was some bullshit tough motor, but all this shit for a 20? :D

Nah in all honesty mine wouldn'tve been half the headf**k it has if me and my mate didn't make an important decision re how to swap looms while absolutely plastered last weekend :) that was where the real troubles began.

try doin it for 8 months for a stock motor haha

Well I think my GTR has proven a new meaning to the term "GTR handle like they're on rails"

Aye thats well low.... what suspension u running? :P

I just got back from a 2 hour drive thru the adelaide hills, from hahndorf to lobethal and gumeracha as well as a few detours here and there, loads of great twisties, some nice sweeping bends and the odd straight road make for a great time. even got to drive on a single lane dirt road with a huge dropoff on one side... gtr lapped it up and asked for seconds

*sigh* so have to do that next weekend

-D

Wonderful! Pulled my RS250 race bike engine down and found some foreign metal in there. :P Appears some douche at the track didn't like a little 250 spanking him and his 1000 and put foreign bits (a piston pin not even for my RS) into my crank case when I left it unattended ... resulting in the clutch basket gear, gearbox engagement gear, and seals being wrecked. Now its rebuild time ... and I haven't started the season! :D

Might have found a race spec motor in Singapore ... waiting for confirmation.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Nah that is not actually a lot. Just painting my GTR frontend and the little bits to make sideskirts/nismo flare pieces work correctly/fit on the sedan/mount up correctly came to about $7000. Is it a lot? Sure. None of this is economical. Economy would be shelling the car and buying a 2010 Corolla to commute in. The perspective of all of this is different.
    • I have the 2025 build re003s’ on my 06 XT Forester Turbo and I quite rate them for street wet and dry
    • I don't see any issues here. I've been saying all along this is a big job, the price reflects that.  When the car comes back perfect I'm sure it will feel like money well spent. 
    • Remember, take original quote. Double it. Then add a bit more. It's how any project goes.
    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
×
×
  • Create New...