Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

Well, work just lost our major gov tender. We expected to get it too.

Spewing... I hate it when that happens, means the entire business starts cutting back in all sorts of ways ;\

Wanted to note here that I just got my car back from Boostworx (Road and track are booked out working on muscle cars this week) who were very good to look at my car at extreme short notice - z32's are now fitted and a partial tune was made by Shaun to get the car nicely drivable on the street. Have some niggling little issues that need to get addressed before getting the upper end tuned, however I was very happy with the price and service from Boostworx, so two thumbs up from me.

-D

Should look a bit like this and have the extra hole that is plugged up. I have a filter relocation kit and have a different setup that doesn't use one of these.

podkladkahi3.jpg

That is exactly what i have hooked up to the block Chad....will check for that extra hole on the side when i get a chance to mate....cheers for that :P

yeah Catch ftw our church has a laptop off them very good indeed

i dare say the one above would play a lot of modern games

although im not actually sure how powerful the gfx card is seeing im an ATi fan :P

NVidia GeForce GT320M 1GB

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...