Jump to content
SAU Community

Recommended Posts

Just thought I'd tell you guys of a fcouple of things I've found out about my R34 over the course of owning it.

The tiptronic gearbox in the non-turbo is the same unit as the turbo one has! I'm guessing due to the expense of developing two differnet items for a car that had a limited existance.

I'm yet to confirm this for the non-turbo manual 5 speed, as I don't have access to one to check out.

Also R34's use top-feed injectors for the whole range..from RB20, RB25 to RB26...yet another strange thing.

Dan

Link to comment
https://www.sau.com.au/forums/topic/29202-strange-things-about-r34s/
Share on other sites

666DAN - Our GTT's (RB25DET) use side feed Injectors, not top feed (see Here) and, at the moment, I can only find one injector upgrade (Nismo 480cc) because they're some kind of special plastic version and therefore R33 ones won't work! (unless you change the fuel rail and/or the resistor packs)

PS

Here's a piccy of an RB20'd R34

bubbleoct0307.jpg

MY old GTS was powered by an RB20E. It wasn't that bad! It wasn't good either, but it was a skyline and it was cheap. So, if I had to guess why Nissan made the Skyline range available with a RB20E I'd say to reduce the cost of the entry model to appeal to more people.

The surprising thing about the skyline is tha although it's a kick-ass sports car, it's also a 4 door family sedan that Grandpa Joe likes driving around in...and granpa Joe usually doesn't care how many cams are under the bonnet... :(

There is actually a name for those rb20e R33's, but i cant remember what it is.  I think it started with "E"  Someone who had one should know.

Nissan Skyline "Extremelyslowcarthatlookslikeasportscar"?

But Nismo only supply top-feed aftermarket injectors for the R34 series, as they are the only direct replacements for the factory rail...which is top-feed....go have a look, I've even taken my one out. YES R33 RB25's use side feed...not the R34.

Check this out...

Nismo injectors http://www.takakaira.com/asp/template.asp?...MNnJkKkfhGielHg

These are the engines the R34s came out with in 1998

2 DOOR:

Engine Model - - Power output

4WD :

RB25DE25GT FOURENR34-5MT/E-ATx--200PS/6000rpm

26.0kg-m/4000rpm

2WD :

RB25DET--25GT TURBO ER34 5MT/M-ATx 280ps/6400rpm 35.0kg- m/3200rpm

RB25DE 25GT ER34 5MT/M-ATx 200ps/6000rpm 26.0kg-

m/4000rpm

RB20DE GT HR34 5MT/E-ATx 155ps/6400rpm 19.0kg- m/4400rpm

4 DOOR

4WD :

RB25DE 25GT-X FOUR ENR34 E-ATx 200ps/6000rpm 26.0kg- m/4000rpm

RB25DE 25GT FOUR ENR34 5MT/E-ATx 200ps/6000rpm 26.0kg- m/4000rpm

2WD :

RB25DET 25GT-X TURBO ER34 5MT/M-ATx 280ps/6400rpm 35.0kg- m/3200rpm

RB25DET 25GT TURBO ER34 5MT/M-ATx 280ps/6400rpm 35.0kg-

m/3200rpm

RB25DE 25GT-X ER34 E-ATx 200ps/6000rpm 26.0kg- m/4000rpm

RB25DE 25GT ER34 E-ATx 200ps/6000rpm 26.0kg- m/4000rpm

RB20DE GT HR34 5MT/E-ATx 155ps/6400rpm 19.0kg-

m/4400rpm

so are they low or high impendence?

would GTR ones fit?

They're the opposite of the GTR ones but I can't remember which they are (I think it's high)

the only upgrade I could find (from any maker) was the Nismo 480cc ones, but if you alter the resistor pack then you could fit GTR ones I suppose.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
    • @Stringycheese  Have you only gone to the one blue slip workshop?  There will be a heap of them where ever you live, good odds that the next place you go to will pass the car.  Unfortunately (or fortunately?) every blue slip / engineering workshop will be different and will be happy passing or failing different things - despite working from the same set of rules. It's kinda like 2 lawyers arguing over a piece of legislation, each saying their interpretation is correct. Might seem strange that this happens when it comes to getting a modified car passed, but this is very much a thing. A big part of the game is finding an engineer / workshop that is on the same page as you.
    • Bah. I daily mine. ~60km per work day, 10-12 thousand km per year. What's the point of having a dirty old Datto and leaving it in the shed. It needs to be driven and enjoyed while the govco allows us to do so. It will only be a few years before we're forbidden to even start up internal combustion engines.
    • Judging by that spring perch and the normal looking spring on it - not a coilover. Well.... it is a coilover, just a stock format coilover, rather than what everyone calls a coilover.
    • Yes it is. We get stock from Nismo directly. I'm happy to take photos/video of it as proof before I ship it with timestamps or whathaveyou.
×
×
  • Create New...