Jump to content
SAU Community

Recommended Posts

Hey guys, I gave this a quick search, though I wasn't sure as to what forums I'd find an answer in, nor was I sure what to search for exactly lol.

This is (as of about 6 months ago) my car:

http://www.skylinesaustralia.com/forums/R3...ht-t242518.html

That FS thread gives a decent list of all current mods/parts on the car, and the only things I've done to it since I got it is steering component replacements (tie rod ends etc) and all exhaust gaskets from the manifold back. No performance upgrades.

Now that I've had those 2 repairs done it it, I'm looking to build it up a little. Currently making 167.7rwkw @ 11psi on a mainline dyno.

Unfortunately due to my inexperience with modifying cars, I'm unsure what do start with. I have a good idea on what to do overall, but not what to do first. This is where I'm hoping some of you guys can help out a little :(

As the car is technically a daily until probably around March next year (when I move out after overseas trip), I don't want to go TOO far and have something that's not worth putting the kms onto. I'd like to aim for anywhere between 220rwkw - 250rwkw until this time.

Any suggestions as to where NOT to start would also be much appreciate if you can't put in any input as to what to do first :(

Thanks guys :D

Link to comment
https://www.sau.com.au/forums/topic/293715-looking-to-begin-further-mods/
Share on other sites

Oh? Interesting. I'd thought maybe a little more than that would be needed, but that's probably good! What kind of $$$ am I looking at for something like a Vipec? And any particular brand for injectors?

sard or nismo injectors and a Vipec or second hand PFC and a tune and you'll get 230-250rwkw no probs. So around $2.5-3K and your there. Not sure about the exhaust either?

But easy mods really.

  • 1 month later...

ok so bumping my thread...I haven't had the time to organise any mods as yet, but after having it run on the dyno to investigate a few odd engine sounds that only appear under load (gas leak sound ~2400rpm, whistle sound ~3500 - 5000rpm) and being told that the mechanic couldn't replicate any of the sounds, but not to worry about them as they won't be something vital (ie. cat could be bung, BOV could be leaking under full boost)...

The upside of this dyno run is that the CAS was out, causing retarded timing. Not sure how many degrees it was out by, but after lining it up correctly, the car made 190.8rwkw @ 184kp/h - like I said, same mods as above...

Any rough ideas on what power figure I could achieve with Injectors, pump, and Nistune? Still aiming for 230-250rwkw, but after having seen power increases from some other people's runs, I got no idea what to expect haha

Thanks again oh-knowledgable ones :)

  • 3 weeks later...

Hey troy, as it was my car, and I had the same thoughts as you, I was told to go with a decent set of injectors and ecu.. Rb25 AFM's work well for the power you are wanting to acheive, so I would suggest a Power FC, they are readily available second hand, and they are a cake-walk to install and tune.

Therefore my suggestion would be in this order.

Power fc

Injectors

Full service

Tune

See where youre at when this all goes down and you should be good for what your chasing.

Then stage two would be imo.

Turbo upgrade

Cooling system revised, including radiator, and oil cooler

Air intake system revised, AFM and CAI

Re-tune

This would see the car becoming quite a scary and fun little street car for what it is..

Really it all comes down to the specs of that highflow turbo and what power it will make. Any information on what company highflowed it? Will give you a better indication of what power it will most likely make and how far you can push it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...