Jump to content
SAU Community

Gapping Point Spark Rb20det

MYCEF3

By MYCEF3,
in South Australia

 Share

Recommended Posts

MYCEF3 Collaborator

MYCEF3

Posted
Posted (edited)

Hey guys

Reeeeall stupid qusetion and i cant find it no where

What is the exact sparking mesurement for the spark plugs (RB20DET)

Iv found n bn told 1.0mm

1.1mm

0.08mm

I had them all at 1.0mm and it was missing as i was coming on boost fairly mild

took them out made them bit smaller roughly 0.9mm and its running a hell of a lot better now top end high revs is missing???

Sooo im thinking its smaller again!

Just so i dont have to take it apart again, What u guys reckon

Cheers

Edited by MYCEF3
Link to comment
https://www.sau.com.au/forums/topic/293895-gapping-point-spark-rb20det/
Share on other sites
MYCEF3 Collaborator

MYCEF3

Posted
  • Author
Posted

Cheers KISIN! Yeah i found that, but the answer that person gave "Ummmmmm i reckon..... roughly 0.08mm" (WOW convincing much)

Which yeah i wanted to ask yous n find out EXACTALLY the messurement

MYCEF3 Collaborator

MYCEF3

Posted
  • Author
Posted (edited)
0.8 not .08 sorry typeo!!

and yeh standard for RB25s as well.

Hahah thats what i ment as well!

0.08... That would be a very tight spark :P (haha... tight.... :thumbsup: )

Edited by MYCEF3
D_Stirls Veteran

D_Stirls

Posted
Posted

With an N/A engine 1.1 is the standard and that is what most plugs are out of the box.

With a force inducted car you get away with what you can but most people will run around the 0.8 mark.

Also be careful with platinum plugs (which i will never use unless i own a car which is a bitch to change plugs) not to touch the electrode as the platinum coating is only a few microns thick and if you push a screw driver in their trying to gap a plug you will ruin it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW )
    • PranK
      Blue slip

      By PranK · Posted

    • GTSBoy
      Ethanol Content Sensor - Always at 11%?

      By GTSBoy · Posted

      But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Dose Pipe Sutututu
      Blue slip

      By Dose Pipe Sutututu · Posted

      Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
×
×
  • Create New...