Jump to content
SAU Community

Recommended Posts

  • Replies 122
  • Created
  • Last Reply

Top Posters In This Topic

I am fully with Steve .... I haven't been defected yet, but a mate that owns a certain sweet canary yellow 20B Cosmo (he's about 35 y.o. btw) was driving home from shopping and a copper followed him about 5km then finally pulled him over and stated he 'didn't even need a reason' - when questioned why.

The Cosmo got defected for too low, and too loud exhaust, even though the copper didn't test either noise level or measure clearance whatsoever. Worst thing is that the BOV, Nos, etc will have to be pulled off to get through Regency, yet the cop was too stupid to realise these VERY obvious items were even on the car.

Like most (if not all) of our cars, this is a premium example of a pampered car with the latest and greatest safety devices and is meticously maintained. Unlike the vast majority of male teenage Elizabethans driving their V8 VNs that they picked up for $3k and run around with no brakes and bald tyres, but don't get looked at twice by the fuzz :(

Bushy2k: I am makin a flap in the exhaust so that if i get pulled over, it can basically close the exhaust and make it quiet as.

Im also hightenin my car as to be just a bit under legal limits. Also i now have stock bov, and am goin to place boost controller in a box, therefore makin it non visable. This would mean my car is basically totally roadworthy. I can still imagine that i can get defected. I mean it makes sense. Cops are more concerned about cars being 1-2 cms lower then standard then murders and holdups/theft etc etc.

all other states are more leniant than SA.. QLD being the luckiest.

the only other state that are close to being as strict as SA is VIC who have hardcore EPA tests with their inspections and they have it worse in a way in that they have big ass fines too.

eg.

first offence on loud exhaust. get it inspected.

second offence.. $200-500..

third offence, something like $1g...

and these fines are at each officer's discretion as well.

NSW are lucky in that they can just get a RWC from anywhere (including dodgy backyard mechanics) that will clear a canary..

and overall it isnt a problem with the 'dorifto's' out there losing control. i see more pushrod commodores doing fooly sik burnouts and losing control than an import doing a drift. the problem here is with cops targeting ALL forms of modified vehicles.. be it imported, local, whatever..

Guys im still ****in defected and whats worse is that the wanker inspenctor found a bend/dent in my chassis rail.
oh ohh..... I've got a few dents in the chassis rail from japan in mine..

I had it checked out by a Chassis place and they said sure its deneted but it doesn't affect the integrity of the car as it isn't actually a rail as the cars are monochassis or something. He said it was only cosmetic. He also said there is no way they should be able to defect me for the dent in the chassis.

Well thats what the specialist said. They basically dont do much cos its a mono**** chassis (somethin like that). Basically he said even thou there are bumps in it etc, they wont move for 20years ++. But he also said there is no point arguing it with them. U just have to do it.

Well thats what the specialist said. They basically dont do much cos its a mono**** chassis (somethin like that). Basically he said even thou there are bumps in it etc, they wont move for 20years ++. But he also said there is no point arguing it with them. U just have to do it.
This is what makes my blood boil.

Who are these regency blokes? What qualifications do they or are they required to have?

Or are they living with the dinosaurs where cars didn't have the mono chassis?

raaaaaaaaaaa.

Glad I have a degree in mechanical engineering, a backgound trade as a mechanic, a healthy working understanding and tertiary specialisation in radar, laser and acoustics, legal training and a Queens commission.

Cops have cringed when I start discussing these topics during social roadside discussions. Never been canaried tho for some reason.......

A mate has just moved to Adelaide with a modded MX5 so I have to call him and tell him to watch out for the dangerous hoons in imports, and the even more dangerous, due to stupidity, state law enforcement representatives.

I'm looking further into accreditation for the purpose of vehicle engineering inspections and offering a Melbourne service which may help some of the guys here.

I'd be happy to try my luck, and tear them apart in court for constitutional breaches as well as offences under the trade practices act if their services at regency are billed and their findings/advice are inconsistent and misleading. :whip:

The commission gives me authority under the defence force disciplinary act (a federal act of parliament) similar to those of a magistrate, although I don't need a jury and can fine, incarcerate and jail offenders. Ever wanted to argue with a judge? I know who the local magistrate will side with if it came down one word against the other. And if you ever needed an expert witness in regard to things technical or mechanical you get an engineer not a coppa or mechanic. Bring em on.

Just hate that it sux so much for you guys.

Which is exactly why these cretins OWN your asses. Take them on after doing some research.

I don't claim to know everything, but I have a hell of an education and trade qualifications and will not allow myself to be subject to corrupt behaviour.

Sure you think SA is pure as the driven snow. Qld had the fitzgerald enquiry into corruption, NSW had their ICAC and Vic are getting shafted now. Think it's just going to get forgotten? SA will have it's corruption witch hunt but only if people complain enough and demand accountability. they are ONLY public sector employees.

Geoff sounds like you have some sort of plan to stay of defect. when we back chat em over here we get raped. i was defected in my 33 for doin nothin aswell but my car was illegal and i payed the price. I understand where ya coming from and i reckon we need someone like you leadin the way against these people. what ya say?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha luckily we don't have emissions, inspections, or any laws against power adders here. They only thing they somewhat keep an eye out for are ridiculously loud exhausts. 
    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
    • Hey everyone! Im so grateful to be apart of this community and ill do my best to be apart of this. Firstly, i'm not disclosing my real name due to in real life circumstances surrounding my privacy and public image (sorry lol) Secondly, The only thing personal I am willing to share is that I'm from Sydney and a descendant of one of Sydneys largest mortgage firms. I got gifted my first ever car, a 2022 Porsche Cayenne and I love it to death. Ive been driving it for about 5 or 6 months now and honestly Im so grateful for my parents for gifting me this vehicle. However recently I've been working my ass off to afford my second car (which I need help deciding soooooo community help me out please?). Once decided, im planning to try modify it myself. Recent I've been thinking about getting a Skyline, particularly a 25GT or GT-V, yes I know overrated as hell, but I'm also considering a Chaser which I recently came to love. However my dream is to one day own a 180SX (So hard to find clean versions and im not really into importing).  Lastly before I send this off, I want to apologize if I sound tacky or pretentious. I try not to and want to genuinely learn from everyone and anyone. (Im no expert in this area) Thanks for reading!
×
×
  • Create New...