Jump to content
SAU Community

**my Rb20det Rebuild Questions Advice Needed**

mattR32gtst

By mattR32gtst,
in Engines & Forced Induction

 Share

Recommended Posts

mattR32gtst Explorer

mattR32gtst

Posted
Posted

Hi everyone ill try and keep this short.

Iv been running my rb20det for 6 months at the final map of 402bhp fly and 375lftb.

On attending a drift day at one of the bigger tracks ready for next years competition season to start i developed a knocking noise, it was then deemed to be bottom end :happy: .

So... i want to rebuild the 20 ( no i dont want to go rb25 before anyone says it will save money )

so as you guys down under seem to be pretty keen on the rb20's what info and sources can you give me on getting uprated parts for decent money as no wear in the uk supplies such things.

Im talking forged pistons & rods etc...

any help and input appreciated

BlueRB240 Collaborator

BlueRB240

Posted
Posted
Hi everyone ill try and keep this short.

Iv been running my rb20det for 6 months at the final map of 402bhp fly and 375lftb.

On attending a drift day at one of the bigger tracks ready for next years competition season to start i developed a knocking noise, it was then deemed to be bottom end :happy: .

So... i want to rebuild the 20 ( no i dont want to go rb25 before anyone says it will save money )

so as you guys down under seem to be pretty keen on the rb20's what info and sources can you give me on getting uprated parts for decent money as no wear in the uk supplies such things.

Im talking forged pistons & rods etc...

any help and input appreciated

Did u spin a rod bearing? You could try and find a good crank and add the oil pump collar and a oil restrictor to the head. Just throw in some new rings and bearings and be on your way. http://www.spoolimports.com/ sells forged rods and pistons for the RB20 if u want to go that route.

mattR32gtst Explorer

mattR32gtst

Posted
  • Author
Posted
Did u spin a rod bearing? You could try and find a good crank and add the oil pump collar and a oil restrictor to the head. Just throw in some new rings and bearings and be on your way. http://www.spoolimports.com/ sells forged rods and pistons for the RB20 if u want to go that route.

I havent taken it all of yet to see axactly what has happened.

sorry if i sound stupid here but whats an oil pump collar and oil restrictor to the head is it something to prevent oil starvation like the 26's suffer from.

Iv been reading lots of other threads about the 2. builds and im definatley thinking of doing the 2.2 which involves parts that are fairly easy to come buy .

boostn32 Mentor

boostn32

Posted
Posted (edited)

ive built a 20 that will be sure to produce the goods. there are so many ways people will tell you to go. i dont use the rods as mentioned above i dont use oil restrictors as that isnt the problem as every one thinks.

Edited by boostn32
AndrewJZX100 Mentor

AndrewJZX100

Posted
Posted

^ pretty sure not, but I'd love to know for sure as well cause my 20 is poo'd out and my mate has a 25de with a snapped cam that I'm currently in the midst of sourcing a head for.

If they fit that'd be great to know.

Roy Grand Master

Roy

Posted
Posted

I have been making about 425hp at the fly for a while now and the internals seem pretty happy. Before buying parts be sure to remove the engine and strip it down and make sure you know the root cause of your problem.

After stripping you may find that your pistons and rods are fine, but your crank badly damaged from a spun bearing. If thats the case then it would confirm what i suspect and thats the internals are ok for that power, but what you have to work on is the control of oil pressure, oil temperature and coolant temperature. You may find you will just as easily spin another bootm end bearing with a fully forged motor if you have not addressed oil presure and tempeature issues and made sure you keep coolant temp under control as well.

So the money you are about to spend on rods and pistons may be better spent on Tomei/Jun/Grex etc oil pump and better oil cooler setup

mattR32gtst Explorer

mattR32gtst

Posted
  • Author
Posted

Cheers Roy some good advice there i must say i was planning on uprating the oil pump and also fitting an oil cooler.

does anyone know of what 4agze pistons i need or where i can get fully forged rb20det ones ???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      Torana Lx Gtr Hatch, Lots Of Pictures

      By The Bogan · Posted

      LOL, when one "money pit" is never enough Noice, and excellent work mate
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
×
×
  • Create New...