Jump to content
SAU Community

Recommended Posts

Needed to make some room so have to sell my parts.

Located in adelaide.

Reasonable offers considered, but the prices are already cheap so don't be a dick.

Advan Model 5 Wheels - f:18x8 r:18x9. 5-stud, offsets are +35. No gutter rash! Come with shit tires. - $950 Bargain!

HR31 JDM Projector headlights. - $200

Seats, Bride/Recaro style copies. Like justjap sell. Pair in black, pretty much new condition. -$100 pair!!

Garrett T51 turbo. Plain bearing core. T6 flange 1.2 A/R Good for 1000hp. BRAND NEW! - $800!

S13/R32 rear coilovers. HKS Hypermax Pro. 7kg/mm springs. Good condition. -$300

R32 RB20det engine (good condition) All sensors/parts included minus - No turbo, no clutch or gearbox. -$850

VG30 turbo on modified rb20 manifold with external gate/screamer pipe setup. Manifold, turbo, wastegate and dump for only - $350!

R32 RB20det engine loom. $150

Or you can get the rb20det engine with vg30 turbo setup and loom together for -$1100 Bargain!

Everything is in great condition. All the parts are at Japanese Performance Imports if anyone wants to go have a look.

Or call me: 0434 637 357 -Jeff

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Garrett T51 turbo. Plain bearing core. T6 flange 1.2 A/R Good for 1000hp. BRAND NEW! - $800!

could you please post some photos of the turbo?

*edit*

dont worry, as said on the phone, ill buy :(

Edited by Tocchi
Pics on R31 JDM Projectors please, any damage?

Yes the drivers side one was broken at the rear plastic part where it mounts to the car.

But i had it repaired and used it in my car for a long time with no problems.

The glass and lenses and internals are all good. I will get pics.

I have had a lot of requests for pics for everything and i am trying to sort it out.

Should have some pics up later today.

Cheers

ha ha that is the best avatar picture i have seen in a long time.... took me a while to even realise what it was but it's brilliant

Can't seem to edit my post... but these items are SOLD and no longer available.

T51 Turbo

VG30 turbo/manifold/gate

Picture of the seats. Driver side has cefiro rail. Passenger has R31 rail.

They have sat in the shed for a year and are a bit dusty but it wipes right off.

post-32516-1257377387_thumb.jpg

Pictue of headlights. Also a bit dirty.

post-32516-1257377504_thumb.jpg

Picture of Advan wheels. Forgot to mention they are painted black.

post-32516-1257377785_thumb.jpg

Cheers.

hey jeff

VG30 turbo on modified rb20 manifold with external gate/screamer pipe setup. Manifold, turbo, wastegate and dump for only - $350!

is the gate setup on the manifold? willing to sell that on its own?

Cheers

can you post up a pic of the hipermax's dude. they are 7kg/mm? i need em for a 32gtr, but i think the gtr's spring rates were 8kg/mm. post a pic up anyway dude, one of my rears is leakin bad so i will prolly take em anyway.

cheers,

andrew

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...