Jump to content
SAU Community

Recommended Posts

It's time for the world's greatest show and shine again. This year at New Quay Docklands, Vic.

Expect all manner of Z's, Skylines, Fairlady Roadsters, 1600s and Princes. There'll also be some more modern stuff - but you don't have to look at it.

Short of an act of god, Ill be there with my C210. (last year I had the car painted for the event but threw off the timing chain driving home from the painters.)

Hope to meet some of you there.

Link to comment
https://www.sau.com.au/forums/topic/295227-ndsoc-concourse-d-elegance-vic/
Share on other sites

My good friend owns the C210 coupe, and has 2 more sedans in similar (mint) condition. My other mate has a C211 coupe and a C210 coupe slowly coming along as project cars, and yet another friend gets around in a 2L turbo C210. I bought and then sold a C210 coupe to a guy I know in Tassie a coupe of years ago (should have kept it - slaps forehead)... but yeah, they are very hard to find these days. As little as 4 or 5 years ago cars popped up here and there, usually for pocket change. Now it's a struggle to even find c210 sedans. Handfuls have gone OS, but a great many more have been neglected, rusted out and scrapped.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...