Jump to content
SAU Community

Recommended Posts

Good day!

Does anyone know the exact location of the fuse box for the v35 model ? my skyline has got the air bag light on. I just want to try removing the fuse & clean it a little bit.

cheers

"Turn the key to the on position and watch the airbag light. It should stay solid for 5-7 secs, and then turn off, and then start to flash.

To reset the light, you must turn the key to on, watch the airbag light stay solid for 5-7 secs and as soon as the airbag light turns off, turn the key to the off position (you have to turn the key to off before the airbag light starts to flash, or you must start over). You need to repeat this 5 times. Try to start the car, and hopefully the light will be reset"

No more Air Bag flashing light or Nav screen warning!!

Link to comment
https://www.sau.com.au/forums/topic/295446-v35/#findComment-4925485
Share on other sites

"Turn the key to the on position and watch the airbag light. It should stay solid for 5-7 secs, and then turn off, and then start to flash.

To reset the light, you must turn the key to on, watch the airbag light stay solid for 5-7 secs and as soon as the airbag light turns off, turn the key to the off position (you have to turn the key to off before the airbag light starts to flash, or you must start over). You need to repeat this 5 times. Try to start the car, and hopefully the light will be reset"

No more Air Bag flashing light or Nav screen warning!!

cheers, i will try this

Link to comment
https://www.sau.com.au/forums/topic/295446-v35/#findComment-4925498
Share on other sites

I took it & they pluged it in to the computer the out up was " B1166 LH (Open)

Meaning, the fault is LH curtin air bags. & my car doesn't have side air bags.

& the light is back on.

Any interstate professinals have you had this experince before ?

Link to comment
https://www.sau.com.au/forums/topic/295446-v35/#findComment-4938929
Share on other sites

I have the sedan.

I'll give you something else to check, cause I'm having the same issue as well. The scanner gave me some wierd message like yours too(can't remember if it was the same though as it was ages ago).

Under each of the front seatbelts there is a connector with a wiring harness. Is it loose? Check both front seatbelts. I snapped the connector one day while trying to adjust it(bloody things don't move). And since then the airbag light comes on. If I hook in the connector with a cable tie, it's good. If I play with it, airbag light comes back. Finally decided to order the part from Japan, will be here in a few weeks.

Link to comment
https://www.sau.com.au/forums/topic/295446-v35/#findComment-4941063
Share on other sites

Thankx Skizo, that sounds more like it. did u have it coming each time you were driving ? what was ur error code? B1166 ?

Because the scanner said LH side I gave the LH seat & wiring a good shake & reset using the ON/OFF x 5times. & I have driven about 100k's all around & it still hasn't poped up. so hopefuly it's gone for good.

there is soo much wiring under that seat.

Link to comment
https://www.sau.com.au/forums/topic/295446-v35/#findComment-4941547
Share on other sites

Can't remember the code, it's been so long since i hooked up a scanner to it.

Yes the airbag light would come on every time I drove the car. Even after a reset, it would be back the next time I drove the car, until I cable tied it. So in my case I believe that the broken seatbelt connector on the buckle was the issue.

If it comes back let me know as there are some more detailed things you can check as well.

Link to comment
https://www.sau.com.au/forums/topic/295446-v35/#findComment-4942692
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...