Jump to content
SAU Community

Recommended Posts

Hey does any one know what tie rod ends stag c34 rs4 s1 uses. went to get wheel alignment rhs shagged and nissan want like $150 per side F that. Any help or part numbers would be very helpful. I presume they are probably the same as r33gtr any help ??? :)

Link to comment
https://www.sau.com.au/forums/topic/295461-rs4-s1-97-tie-rod-ends-help-please/
Share on other sites

Hey does any one know what tie rod ends stag c34 rs4 s1 uses. went to get wheel alignment rhs shagged and nissan want like $150 per side F that. Any help or part numbers would be very helpful. I presume they are probably the same as r33gtr any help ??? :)
tie rod ends - part number - 4852023U26 Found these part numbers for tie rod ends are they correct?
PM stagstock (mat) he knows his shit and has replaced his on his s1 rs4v :D
will pm have ordered some from auto pro but book only says 2.6l r32 and 2.6l r33 hope they fit as they are only $25 each. Anyone got any more info?? :thumbsup:
i got my genuine nissan ones for 110bucks not too long ago
Any one no if the tie rod ends are r32/33 gtr ??????????????????????????? please!! :D will post up correct part numbers when eventually sorted ;)

Cheers chook!still confused! wish they just made one tie rod end RRRR! I would presume early S1 would use r33 and later model S2 would use r34......can you still work out which ones fit if I give you my vin?? :D

yeah, send me vin if still not sure.

R33

gtst+gts 48520-15U25

gts4+GTR 48520-23U25

R34

all except GTR 48520-15U25

GTR 48520-23U25

WGNC34

see pic

Autech WGNC34

48520-23U25

Your a legend cheers chook thanks heaps :/:)

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...