Jump to content
SAU Community

Recommended Posts

Im looking to purchase a 1995 ER33

In the description it says TURBO coupe however the title says ER33 GTS

Ive tryed looking back at previous threads on ER33 and the meaning but no one has ever answered that ER33 stands for N/A coupe....

does the ECr33 (c stand for Coupe???)

Ive attached some pics

Fromt he stock wheels i can see 5 studs...

and the engine bay...well i wouldnt have a clue lol

Could someone plz anyalyse the pics and tell me from the engine shot if its a turbo if u can lol

Thanks in advance for any replies

Link to comment
https://www.sau.com.au/forums/topic/29579-er33-turbo/
Share on other sites

and is it a series 2?? or series 1

It's a series 1.

You can also see that it doesn't have ABS (the ABS unit usually sits at the top righthand side - looking at the pic), and it's possible that it's got aftermarket suspension as the strut tops don't look like the factory ones.

Bit hard to tell, but it looks like there's a white plastic T off of the fuel pressure reg too. Might mean there was/is a after market boost gauge.

Oh - last one (LOL), also looks like the factory boost solinoid has been taken out or has been moved.

J

Link to comment
https://www.sau.com.au/forums/topic/29579-er33-turbo/#findComment-603673
Share on other sites

Also it isnt a  series 1.5 front is it

So what would you rekon the RRP of this sorta car would be ??? ball park rough figure

Think it could be a series 1.5 looks almost exactly the same as my series 1.5. I think I can just make out a series 2 spoiler on the back??? Should make it a 95 series 1.5 (officially series 1 of course). I think the black around the front lights is also a sign of series 1. Seems to have cut away some of the front grill.

Link to comment
https://www.sau.com.au/forums/topic/29579-er33-turbo/#findComment-603774
Share on other sites

It looks like a 1.5 to me. Sewid's the expert on the differences between series 1 and 1.5/2 engine bays because he's compared them directly and made mental notes, maybe you could pm him and ask.

I wouldn't pay more than $20k for a realtively stock '95 model. Probably considerably less.

Btw I think it might be a Nismo grille. A friend of mine sold one awhile back and it looks pretty similar.

Link to comment
https://www.sau.com.au/forums/topic/29579-er33-turbo/#findComment-604150
Share on other sites

Yeah its hard to tell from these photos but it looks suspiciously like Series 1.5. I can only judge this by the pink plate on the AFM. Series 1 that I have seen have green plates. This could just be a batch thing though, or even a replacment afm.

Jimx what colour is your AFM's plate?

It's not series two but we all knew that.

Link to comment
https://www.sau.com.au/forums/topic/29579-er33-turbo/#findComment-604447
Share on other sites

It's a series 1.

Oh - last one (LOL), also looks like the factory boost solinoid has been taken out or has been moved.

J

No the factory boost solenoid is still there, it's just to the right of the power steering fluid reservoir.

Link to comment
https://www.sau.com.au/forums/topic/29579-er33-turbo/#findComment-607900
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...