Jump to content
SAU Community

Recommended Posts

The consult plug is the gray plug located at the bottom of the inside fusebox, behind the little coin tray on right side of the steering column. Resetting using the consult plug only resets any error codes you have. You want to clear the self learn, which unless you have a consult cable and software that can do it, just disconnect positive side off the battery, wait about a minute, or give the brake pedal a few pumps just to help desperse any residule voltage. Then reconnect it.

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

The consult plug is the gray plug located at the bottom of the inside fusebox, behind the little coin tray on right side of the steering column. Resetting using the consult plug only resets any error codes you have. You want to clear the self learn, which unless you have a consult cable and software that can do it, just disconnect positive side off the battery, wait about a minute, or give the brake pedal a few pumps just to help desperse any residule voltage. Then reconnect it.

i was looking right there and i didnt see it! it must have been hiding in a nook somewhere :) haha

i'll do the battery trick tonight! :( thanks for the guidance man! :D

Okay few other things I've noticed!

My Tyres at the back are actually probably twice as warn than the fronts!

Would swapping them around fix a possible attessa issue?

When the car has been sitting in the sun all morning and I drive it, the issue happens twice as quickly or

sometimes straight away!

The engine is going strong when it happens,

the air intake sortof wooshes in time with the shudders

(probably cos the car is jerking)

Also after changing the sparkers n cleaning the air intakes the idle

is heaps lower! I.e 7-800rpm warm!

(there is a slight inconsistancy in the idle sometimes tho)

my idle is around 600-700

sounds like you need 4 matching tyres............ attessa issue

the attessa is an expensive system to fix once broken, ie $5grand repair

seriously think about flogging off the tyres and getting 4 new matching tyres, Id suggest this would fix the issue

UNLESS the attessa is already f**ked

i dont really have the cash to spend on new tyres atm. :P

would putting the fronts on the rears fix the issue (if it is the issue) for the time being?

i know i read a thread one time that said that works (i think) ?

Edited by atomaly
i dont really have the cash to spend on new tyres atm. :)

would putting the fronts on the rears fix the issue (if it is the issue) for the time being?

i know i read a thread one time that said that works (i think) ?

I would swap them for sure.

I would swap them for sure.

thanks man. i got the fronts swapped with the rears today. and went for a long drive... and the issue is gone..

the problem now is the fronts are now the more worn tyres so they dont handle as well (feels a bit spongey and not as crisp)

i'll buy some new fronts as a christmas / new year present to my stag :)

BIG thanks to everyone for helping me out :laugh: (specially scotty and cam, i owe u guys)!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
    • That's my life. Past-Duncan has a lot to answer for
×
×
  • Create New...