Jump to content
SAU Community

Recommended Posts

1997 R33 Series 2 120,000kms

I have owned the car for a little over a year, before that it was owned by a friend for a about a year.

Serviced Every 5000km or less with Motul turbo light 10w 40w

Motul Diff Oil

Redline Gearbox Oil

Modifications,

Apexi Power FC Tuned at 12psi (made 201kw)

Blitz Dual SBC boost controller

Split Fire Coil Packs

Walboro Fuel pump

Blitz turbo timer

R34 Turbo (OP6)

RB20 Wastegate Actuator (10 psi)

Split Dump/front Pipe

3in Hi Flow cat (inside not bashed out)

3.5 inch HKS Hi Power Exhaust

Apexi Power intake filter on custom made Metal intake pipe onto the turbo

(Pod not totally boxed in but covered over see photos below)

Standard RRB20 Blow off valve

Greddy Front Mount Inter cooler and piping

Alloy Radiator

Heavy Duty Excedy Clutch

Braided Clutch Line

Braided Brake Lines (ADR approved)

Master cylinder stopper

Front and Rear Strut Braces

Bilstein Shocks and King Springs

Front Whiteline adjustable Castor Bushes (adjustable on car)

Rear Whiteline Camber Bushes

Work Emotions CR KAI 18 x 8.5 in all round

235/35/18 federal 595 SS on the front (70%)

235/35/18 Sumitomo HTR Z 3 on the rear (70%)

Work Wheel Nuts

M Spec side skirts and rear pods

33 GTR rear seat

Have had the Roof lining, A-Pillar and B/C Pillar trims redone in Black Suede (haven't done the sun visors yet)

Only need front GTR seats and interior done

White LEDs' in the cluster

Have Changed the AC Panel, cigarette lighter surround and ignition barrel surround lights all to blue LEDs'

Pioneer Head Deck (DEH-P6850MP)

Pioneer Front Speakers and tweeter

Pioneer Rear 6in Speakers

And finally the rear "Skyline" Boot garnish lights up red with taillights

There is probably more little bits and pieces i have forgotten but i think that will do, Basically the car has never missed a beat in the last 2 years runs great drives beautifully and handles well. Overall i think its one of the nicest R33's running around. Has been my pride and joy for a little over a year but its time for me to move on, Pictures Below feel free to ask any questions.

Price - $18,500 Will get RWC upon Sale

Plates Not Included

PM for my contact details if you are interested

and have a few more photos too

Cheers Scott

post-29410-1258113283_thumb.jpg

post-29410-1258113298_thumb.jpg

post-29410-1258113313_thumb.jpg

post-29410-1258113346_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/296181-1997-r33-series-2/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...
  • 5 weeks later...


  • Similar Content

  • Latest Posts

    • Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
×
×
  • Create New...