Jump to content
SAU Community

Recommended Posts

Ok, I've noticed a few people questioning the worth of the aftermarket warranties that most people have when they buy imports.

This week, the Drivers power window in my NM35 stopped working. Since I have cover to the value of $300 on power windows (which I know won't cover the job, but is better than nothing) I elected to use it.

The experience so far:

Rang their number on sunday to enquire about repair, automated answering service announces office hours (9am -5pm mon -fri) and a reccomendation to call during office hours. Not very surprising.

Rang their after hour "emergency hotline number" this is basically roadservice. Spoke to a helpful mechanic who told me that there wasn't anything he could do, as he wasn't able to make auto electrical repairs; fair enough, he's set up for changing flat tyres, jump starting flat batteries and empty fuel tanks.

Rang office at 9am, told them my issue, referred me to an authorised repairer in my area (within 5 km of my house).

Rang workshop, arranged to drop car off to have window looked at. Calling out of the blue, I felt this was good service; the workshop owner knew that I needed SOME assistance immediately, at least get the window up so I can secure the car.

Called him back at 2:30, car is ready to pick up, he's removed the buggered regulator mech, and fixed the window in position for the time being. I can now secure the car.

Told me he will be getting a price for replacement part, contacting warranty company, so we can proceed with repair.

Got in the car , noticed a small scratch in my window tint, but trim is on, not damaged and window doesn't rattle or anything.

I'm going to let the scratch in the tint go until the repair is complete, giving the workshop an opportunity to come clean before I go any further.

Will update as things continue.

Sounds like decent service to me (bar the tint scratch).

I wish I had that kind of speedy service when my turbo died!

Will be interested to see how it ends up.

Good luck Dale!

Edited by iamhe77

Yeah, fairly happy so far, definitely saved my bacon today!

As for the scratch, it's only $40 to re-tint, so hopefully they'll come to the party.

We'll see how things progress...

I have the same warranty service.... so far they have replaced.......

6x coil paks (with splitfires)

drive shaft

other bits and pieces,

only paid $250 for 3 years.... i think i have gotten my moneys worth! :P

As I posted in Stooge007's thread some time ago... be careful with warranty companys though and who you speak to...

Yes I had coilpacks and few bits and peices changed with 24/7 Roadside Warranty and had no hassles. Once the transmission went in my Stagea i rang 24/7 Roadside and they told me to take the car to a transmission specialist and get a quote for the repairs. I asked the young girl if it was ok to remove the tansmission myself at the car is pretty much undriveable to which she said was fine. So I proceeded to remove the transmission, put it in the back of a mates ute and off to the transmission repairer it went.

Next time I spoke to 24/7 Roadside they pretty much told me they would not be covering any cost of the transmission as the car is not at the transmission specialist's workshop and the transmission wasnt removed by a professional. They admitted i was given false information from one of their trainee staff members but I had broken the agreement. In the end it wasn't worth contacting my solictor, waiting for the case to be heard and all the court fee's so coughed up the $2200 for repairs which i wasn't to happy about.

Edited by SHIZNT

I had a similar discussion with the roadside assistance mechanic on sunday. Basically if I did anything at all to rectify or correct the situation, I wouldn't be covered at all.

I wasn't really surprised, but it was a bit of a pain not being able to secure the car in the meantime.

Mechanic called me today to comfirm vin/chassis number to order parts, so we might be underway!

Recieved a call today from 24/7 Roadside today.

Mechanic has submitted quote for repairs, $500 for new window motor, $250 for new window regulator, $150 in labour. Total $900. Have seen regulator mechanism, tight as all hell, definitely stuffed. I'd rather replace it than try to repair, then have it fail and have to replace it anyway.

So as it stands, with $300 of warranty cover, I'll end up $150 better off than if I'd bought the parts, and done it myself. And presumably the new parts will be warranted against failure for a time.

Not a huge win, but a win nonetheless. On the upside, the warranty company have been very easy to deal with and quick to respond. Also showed the scratch in the tint to the mechanic today, he apologised profusely and was happy to pay for the window to be re-tinted.

Now I just have to wait 2 weeks for parts to arrive...

Cheers, Dale

  • 2 weeks later...

Ok, final update, Parts came in on Monday, took the car down this morning, within 2 hours, the car was finished, ready to pick up. Works perfectly, and I'm now missing a rattle that was annoying me too! Window isn't re-tinted yet but have booked in at the window tinter's (same guys who did the fronts in 20% for me) Mechanic had already spoken to them and teed it up!

So, I'm quite happy with the 24/7 Warranty service, and if anyone in Penrith has cause to deal with Aaron from Angus Mechanical Repairs, his work is quite good, he's honest and easy to deal with.

Cheers, Dale

Today I took my car for it first service since I bought it, and was informed that both drive shafts needed replacing as they are worn.

I then quickly checked my 24/7 warranty to see if they are covered, while reading I noticed it said worn parts will not be covered.

Although CV joint are covered, how exactly do I clam on this if my cv joints are worn??? Do I need to wait til they completely fail, I rang

24/7 but surprise surprise they were not willing to give me any advice simply saying worn parts are not covered. Luckly they had not

yet processed my warranty so I have time to re-group before speaking to them officially.

Any advice on this is greatly appreciated.

Today I took my car for it first service since I bought it, and was informed that both drive shafts needed replacing as they are worn.

I then quickly checked my 24/7 warranty to see if they are covered, while reading I noticed it said worn parts will not be covered.

Although CV joint are covered, how exactly do I clam on this if my cv joints are worn??? Do I need to wait til they completely fail, I rang

24/7 but surprise surprise they were not willing to give me any advice simply saying worn parts are not covered. Luckly they had not

yet processed my warranty so I have time to re-group before speaking to them officially.

Any advice on this is greatly appreciated.

How long since you purchased your car? If it's under 3 months, the dealer you bought through, will be responsible for the repairs.

Make sure you dont say they are worn... they wont replace worn parts... broken parts yes... so just get the mech to say there broken...

I'd agree with this approach +1

Interesting thread Dale. You explained the process very well!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...