Jump to content
SAU Community

Recommended Posts

Just put in a z32 before I take it to get tuned it idles fine just a quesiton in the faq it says about adjusting the AJR vaule in the IGN/INJ settings until you see abit of black smoke I have put the vaule up to about 1.40 but I still do not see any smoke does any know of roughly how much higher the AJR vaule has to so I can have a guide to how high I have to go the get black smoke.

Edited by skline01999
Link to comment
https://www.sau.com.au/forums/topic/296570-temporary-z32-settings-power-fc/
Share on other sites

have you selected the z32 afm? Personally i'd just do that and leave the injector correction alone as on cruise the closed loop will get the mixtures right enough for you to drive it. Just keep it off boost and you'll be fine.

leave it alone then mate. I think you are being overcautious by trying to richen it up.

I generally just leave the injector correction a couple of % on the low side so it gets a bit of extra fuel that way.

yeah the z32 is selected it idles perfectly with the z32 and new injectors so just got to drive it now to get tuned

It should be fine, just dont get to spirited ;) Most of the time they are safe enough till load point 10 or so.

alright thanks guys. Trent I want to get my car tuned at your workshop sometime in December have you got any time? Ill ring to confirm the date as soon as I find out when my dad has a day off so he can drive my car there since I dont have my license back yet

alright thanks guys. Trent I want to get my car tuned at your workshop sometime in December have you got any time? Ill ring to confirm the date as soon as I find out when my dad has a day off so he can drive my car there since I dont have my license back yet

im sure we can squeeze it in sometime.

+1 to not upping fuel more than you need too.

In the 7 or so kilometers to the tuner I managed to foul my plugs because I was worried about it running too lean. Ended up costing me more as I need to get a touch up tune done at the boost levels I was looking for without any misfire.

Edited by Kwyjibo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...