Jump to content
SAU Community

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Nissan is a good start

Either way unless you're changing the belts yourself, sometimes its better to just let your mechanic buy the belts for you (assuming he is an honest bloke!). They get trade discounts, and if they buy the wrong ones it is their own problem.

I am due for some myself..same prob with the cracks...the Burson sales person told me to take mine off, then take it to the Burson store and he'll find me the 'right' replacement ones...when i get them done, i'll post up an aftermarket part brand/number...

best of go nissan , as most time aftermarket will be shorter or longer anywhere from 5-15mm depending on belts and then you will have problems with instaling the belts

nissan will have right belts for our cars and no stuffing around , they will fit 100%

I saw the smaller of the two Gates Performance belts at supercheap for $24. I'm going to do some ringing around to see if anyone caries a larger selection.

Wow thats exceptional value considering the prices from nissan (for 350z oem). Will check out super cheap also and see what I can find. Thanks for the info.

Make sure you're checking out the Australian Gates Online Catalogue.

Go to www.gatesaustralia.com.au then click on Auto Aftermarket and finally On Line CATALOGUE - Automotive.

You might have to log in (just some basic details etc) the first time but once you're in I think you can add the webpage as a favourite and not have to worry about logging in from then on.

With automotive micro-V belts the part numbering is pretty simple. 4PK915 = 4 ribs, PK pitch (classifies the cross section and distance between ribs), 915 is the length in mm. On cars like mine, R33, they have threaded adjusters and not hydraulic tensioners you have some room to play with so don't need to be 100% on with the length. Just note some belts could have K040360 or similar on it which is the same belt as a 4PK915 just in imperial, so 36.0 inches long. There should be a length that matches the V series skylines.

Edited by Fry_33

There is no listing for an Australian part for the V35/350Z, hence the offshore link. Best call them and double check but failing that you'll have to order it from the US if you want the gates racing accesories belts

Edited by mosoto
There is no listing for an Australian part for the V35/350Z, hence the offshore link. Best call them and double check but failing that you'll have to order it from the US if you want the gates racing accesories belts

Oh, sorry, I didn't actually check it. I'll have someone look into getting it updated tomorrow if I remember. I figure it will be the same as the 350Z so it is something that should be in there. I wonder if it's similar to any other models like a Maxima? Gates might already stock it here but it's just not linked to the V35 as an application which happens occasionally.

I just checked the Gates Australia Online Catalogue and they list the following belts for a 350Z.

Z33 (2002-08) - 3.5L V6 24v DOHC EFI (VQ35DE) - AC

Belt = 4PK945

Z33 (2002-08) - 3.5L V6 24v DOHC EFI (VQ35DE) - ALT

Belt = 6PK1170

Those part# are for standard belts yeah?

Interesting, no listing here for the micro V Performance belts: http://www.gates.com/australia/downloads/d...folder=brochure

If anyone is after performance belts : http://www.powerenterpriseusa.net/products...timing_belt.htm

you'll note the Z33 shares the same AC belt as the BNR34 as well as others.

Edited by mosoto

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...