Jump to content
SAU Community

Recommended Posts

heya.

how is all just wondering i just finished doing a head on my r32skyline the head was serviced and had the 12 bent exhaust valves replaced done by fhyswick heads when i put it back together all wiring is on all vacuums are on all intercooler pipes are on and everything is tight when i tried starting it it pops and cranks but dsnt fire it has injector pulse, has fuel pressure has fuel flow, and has spark.

what im wondering if anybody has had this problem before and has any advice on what it can be any helpfull comments will be highly apprecieated it has been sitting for a couple of months now so do u think its worth while taking the plugs out and skirt some oil down the bores? also when i took the plugs out they didnt have any fuel on them? and it has pressure, flow and pulse.

thanks mark hope to hear back soon

Link to comment
https://www.sau.com.au/forums/topic/297088-rb20det-no-start-after-head/
Share on other sites

oh i dunno never thought to plug the scan tool on lol when i was trying to crank it b4 it went KABANG straight out the exhaust so timing is out somehwere all coils are going to right place and i have all the wiring on the back of them right i drew a map b4 i took it all apart lol.

but would timing out cause the plugs to be dry when i take them out? it sounds like it has compression somewhere but dont have a compression tester to check. i also know there is one blue connecter under the collector assembly that i couldnt find to anything its right under the throttle body and just above the fuel rail.

also noticed the CAS has left to right adjust ment could that be cuase it if thats wrong?

had a look my exhaust cam nvr had a locating tang?

also the exhaust cam looks out a tooth so will redo that and will havta see if i can find a way to re align the cas again..

any idea what tht blue wiring connector could be?

also noticed the CAS has left to right adjust ment could that be cuase it if thats wrong?

CAS should have been marked when removed and put back exactly to same position (usually neutral position in dead center), in the wrong position can do nasty things like advancing the base timing (to the left) or retarding the base timing (to the right).. (if i remember left to right correctly). Timing will need to be checked each time the CAS is taken off.

had a look my exhaust cam nvr had a locating tang?

also the exhaust cam looks out a tooth so will redo that and will havta see if i can find a way to re align the cas again..

any idea what tht blue wiring connector could be?

You should be able to see where the tag broke off. Now all you need to do is visualise how the CAS would have aligned. The CAS also has a set of teeth to locate on the ex cam. By the sound of it, you are 1 tooth out on the CAS mounting position.

heya thanks all yea the exh cam is out by a tooth so when i get a puller to get the crank pulley of will put that back a tooth and get the cas on right cranking it one tooth out shoulnd effect the vavles should it? any ides on the connector will try get a pic of it im guessing the bang out the exuast was cause it was to advnced on the exhaust stroke?

heya guys got the 32 running today but the head seems heaps noisy like as in the cams are to tight i mean they did feel pretty tight when turning it over but didnt think much off it how tight are they cams suppose to feel? also its running pretty rough on start up what are some things i can check that would cause that after doing a head?

thanks mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...