Jump to content
SAU Community

Losing Points From Nsw? But Have Vic Licence


Recommended Posts

Not anymore, the state licensing systems are now all linked together, so getting done in one state automatically applies the points to your license, no matter where you live, unlike the good old days where I had a Vic and WA license, due to having residences in both states, it's amazing how many tickets you could get out of mainly due to the copper not wanting the hassle of ticketing a license from interstate back then.

When were they linked?

up until at least 5 months ago i can tell you for a fact they are not linked.

It was a fine only back in Apr/May when my best mate copped one in NSW on a Vic license.

I'd be keen to know this too. As i might have acquired a fine in NSW, and will they chase me for it in VIC.

God knows I CBF'd to drive in Sydney again....what a stupid city that is :D

lol wow 2000? You are unlucky!

As my best mate is in the Navy, i know a fair few of those guys.

Whatever state they are based in, they get a licence in another state, no points to be taken. It's been working for them for the past 10 years.

As far as I am aware, they have been for a few years now, I got a fine in Perth in 2000 and the points went against my Vic license.

yup, i got done in SA 3 or 4 years ago and 3 points still went on my vic license....

A lot of if's and buts in this tread.

But i will give you another thing to think about.

Since you posted this on the 21st and said you got done today that makes it a Saturday and its double demerit on the weekends in NSW..

Before you cross the boarder there is a sign ..

And i hope you didnt get done in a road work area thats double to..

well my experiences from living in a border region are:

You used to be able to get both a Victorian AND NSW licence, effectively giving you double the points. IIRC, if you lost it in one state you'd just switch them over and continue on your way. I am reasonably sure that they have closed this one loophole.

Over the course of my P's I gathered 6 points from the BS revenue raising civvy camera cars in VIC, none of the points carried over.

My sister's BF is licenced in Vic, and got done in NSW for drink driving - I have seen the letter from Vicroads as well as a notice from NSW police saying that he is fine to drive in VIC but isn't allowed to in NSW. This was about 3 months ago too, so obviously its not all working in cohesion yet.

lol wow 2000? You are unlucky!

As my best mate is in the Navy, i know a fair few of those guys.

Whatever state they are based in, they get a licence in another state, no points to be taken. It's been working for them for the past 10 years.

Village_People_In_the_Navy.jpg

The only way I know you can potentially do it is to get a licence in another state at the same time as you have your Vic one and have them applied to that. e.g. At uni in QLD, get a QLD licence and get caught in QLD, apply points to QLD licence, which leaves your Vic one clean. They have to allocate to a licence from my experience. The only thing I have seen them reneg on is from a fixed camera and is the fine portion if you are living overseas (e.g. caught speeding with a fixed camera while back in Oz on holiday from overseas. They still want a licence to allocate points to but certainly a couple of years back didnt pursue the $$)

ive had points taken from vic when i had my nsw licence, but when i had my vic licence i got a fine and points lost in vic 18 months ago, changed it to nsw then back to vic within 3 months n have never copped anything from it. i got a letter from vicroads saying how good of a driver ive been not 2 have lost points within 2 or 3 yrs or some crap.

also have known people to have lost their vic licence, only to transfer it to nsw n get away with it.

i guess in reality it comes down to the cop putting the fines through the system?

I know a lot of vic truck drivers get away with it by not paying the fine you get in nsw, once you pay it then the points come off, only down side is that if you get pulled over in nsw and have racked up too many unpaid fines they will send you back to the border (truck drivers any way).

I got a fine in a mates car in perth about 5 or so years ago, when i wrote down my license number i changed 2 of them, about a month later i got a call from a cop over there saying that the number was wrong and he needed my license number again, after i came to the conclusion that it wasnt my mate trying to stir me up i gave him my license number, with 2 of the other numbers changed, never heard about it again.

Edited by W0rp3D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...