Jump to content
SAU Community

Recommended Posts

Righto

Things I have that I don't need:

RB26 twin td06 20g turbo kit

what does it include?

manifold

turbos

oil lines with dash fitting and heat coatings

dump pipes

intercooler pipes

all silicone joiners and clamps

every nut and bolt to strap this mega power kit to your car

Please note that it's priced to sell

Manifold has no cracks in it and has not be welded since Trust made it

Note this kit comes with every farking nut and bolt you need to place it on your Gtr

I would recommend a re-build for both turbos just to be on the safe side (re- builds cost from 300 from a normal turbo joint to 500 from gcg)

I would also ceramic coat the manifold and housings if you buy it

Cost is around the 650 mark from Craved

I can arrange this if you want

Turbo are on the car and I'm happy to take you for a 1.8bar trip to show you that they are the shit and go harder than a 16 year old lad with his first porno

Turbos made 526rwkw at 20psi

Price $3500

The twins:

PB210057.jpg

Front turbo

PB210058.jpg

Rear turbo

PB210060.jpg

Manifold with single 60mm Trust wastegate

PB210062.jpg

PB210065.jpg

PB210066.jpg

PB210067.jpg

Next we have a built auto R33 Gts gearbox, not sure what its rated at but runs fine behind the above turbo kit

What do you get?

R33 gearbox

Full manualised

Flex plate

3800 rpm stall converter

Oil cooler and line

Tail shaft (i dont need it)

A selection of R33 Gts gearbox controllers

B&N pro ratchet shifter installed and adjusted to the gear box

Basically every nut and bold to hammer it into your R33 and go drag racing

Bolt in and run some times!

PB210068.jpg

PB210071.jpg

Pete

Located in lower Blue Mountains Sydney

0448468884

dam slush box

Next we have a built auto R33 Gts gearbox, not sure what its rated at but runs fine behind the above turbo kit

What do you get?

R33 gearbox

Full manualised

Flex plate

3800 rpm stall converter

Oil cooler and line

Tail shaft (i dont need it)

A selection of R33 Gts gearbox controllers

B&N pro ratchet shifter installed and adjusted to the gear box

Basically every nut and bold to hammer it into your R33 and go drag racing

Bolt in and run some times!

3k for the whole lot

video didnt work farken!

anyway ill punt up some other stuff

16 inch 5 stud waanabe rims (pair) 400

rear 17 inch disco rims 300

760cc injectors 600

trust gtr intercooler 4 inches thick 500

fancey flame painted rocker covers 200 exchange for some stockers

turbo kit will be comming off this weekend

dont be scared people

someone must want a lazy 800-1000hp kit for skidz!

lol

i also priced up some rebuild action and its 350 per turbo

ultimately if knowone buys the kit then ill have them rebuilt

so lets say 4k with rebuilt turbos

:)

hammer time!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...