Jump to content
SAU Community

Recommended Posts

in other news i just found a gtr r32 cat back exhuast in my sed

$250

has a very small hole in a bend that can easily be patched

some jap brand

100 bux extra and ill throw in the 3 inch high flow cat

  • 4 weeks later...

Oh wow, those turbo pics are from Luch's old Z... dare I ask how you came to be in possession of that motor/car? :D Have been for a ride in it many times and the thing absolutely hauled ass (and I was sitting in the boot to keep it on the dyno on its 500+rwkw efforts).

So very tempted to buy them but I dont think a standard RB26 with forged pistons will hold up :\

edit: although in saying that, when he got the car from Japan it was on the belief the motor was just N1 internals and nothing overly special (do you know whats in the motor?). My memory of the car is quite old (probably 5 years now), I know they are not responsive turbos but what rpm do they start making decent power, or better yet, do you have the dyno chart for it?

Edited by Amaru

any chance you want to swap for my low mount set up plus cash your way hks gtss turbos hks actuators hks split dump pipes and standard manifolds plus cash your way? on a standard motor mine made 407rwhp.

cheers

Edited by toy515

amaru

yea they are animals, i bought the car of a guy in belmore.

full boost eg 1.8 bar was at 5800 rpm and yes it went very very hard!

after pulling the engine the bottom end is n1 and the head is worked with cams

toy515. i would be interested in a swap for a t51r setup but not little ss's

cheers

pete

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...