Hella Tight M35

[Chasey]

Photo's by Arie Stokes (nz performance car magazine)

Edited July 26, 2010 by Chasey

[02stagea]

Love it. Love it. Love it.

[bLaQ.bOi]

looks the good champ

exactly the same kit as mine

aero plus the wing!

with the rims. did you have any other issues at all? cleared the brakes fine etc?

trying to find some low offset rims myself atm im just going the space out the ones i have now thou:D

[Chasey]

looks the good champ

exactly the same kit as mine

aero plus the wing!

with the rims. did you have any other issues at all? cleared the brakes fine etc?

trying to find some low offset rims myself atm im just going the space out the ones i have now thou:D

im running 15mm bolt on spacers... but pretty sure the rims clear the calipers any way, just need to get a gaurd roller on the gaurds to make some room

Edited July 26, 2010 by Chasey

[japmatic]

WOW mate! She just gets better and better!

I have been in NZ for 3 weeks and am AMAZED at the amount of M35s I have seen! Where abouts are you? I was staying at my sisters in Remuera in Auckland. Now on the South Island.

[Chasey]

WOW mate! She just gets better and better!

I have been in NZ for 3 weeks and am AMAZED at the amount of M35s I have seen! Where abouts are you? I was staying at my sisters in Remuera in Auckland. Now on the South Island.

im in hamilton which is about 90mins south of auckland, M35's are cheap as chips here.... can pick a standy non turbo one up for $7000

[Blade NZ]

Hey Chasey sweet looking ride. I'm looking for an Aero front bar, they really suit the M35 and yours just sealed it for me.

And yeah there are heaps of M35's around now, prices are good and they're alot of car.

Auckland prices range from about 8k at the bottom (high km) to about 16k for low km top of range. Even a few 3.5's available now.

[Sidius]

Hey guys, im new to the forum but thought id post up some pics of my RS4 turbo M35. Im in NZ but running euro plates.

Running 19x10 AME rims at +5 offset, silk road coil overs, raiser exhaust.

X-member sits at 38mm from the ground.... suspension can go lower but as you can see its hard for the body to drop any more, also top arms hit on the body at this height.

how is the car on 10inch wide mags dont u get rubing and can u do a ful steering whell lock ?

[Chasey]

What do you mean how is it on 10" wide rims? I'd put 11" wide on if I had em lol car has full steering lock with no rubbing on inside gaurd

[SABBAi]

how is the car on 10inch wide mags dont u get rubing and can u do a ful steering whell lock ?

It's all about the offset

[SMOKEYV35]

i like the look of it, but sheesh, 38mm to the x/member - has to be borderline undriveable......

might have to start looking at some bash plates to protect any important bits. if you're on stancenation i'm sure you would have seen all the images of oil pans that have scraped through!

i used to think i was bad a$$ with 60mm of clearance on my LS400.....got sick of not being able to drive it anywhere and the sound of UCA's trying to punch out of the strut towers tho...i must be getting old huh.....

[Chasey]

i like the look of it, but sheesh, 38mm to the x/member - has to be borderline undriveable......

might have to start looking at some bash plates to protect any important bits. if you're on stancenation i'm sure you would have seen all the images of oil pans that have scraped through!

i used to think i was bad a$$ with 60mm of clearance on my LS400.....got sick of not being able to drive it anywhere and the sound of UCA's trying to punch out of the strut towers tho...i must be getting old huh.....

nah the sump is all tucked up... the only part that touches the road at times is the engine X member... i drive this thing every day like this, clocked up about 25,000km at this height. just get to know what roads you can go down and which ones to avoid.

Ive moved to gold coast now but still have the stagea back in NZ if any one is keen to buy it

[WHITER33GTS-T]

Nice. I like it.