Jump to content
SAU Community

Hit a pedestrian Friday night on Toorak Rd


Recommended Posts

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

i finally got hold of the cop tonight.. he tells me she was ok.. broken collar bone tho.. shes from mornington and remembers nothing of the accident but the scary thing now is.. on the night there was these 2 guys that said they saw the whole thing and i wasnt doing anything wrong.. now the cop says because i say i wasnt doing anything wrong.. she doesnt remember anything so it all comes down to what "THE" witness says.. i go wasnt there 2 witnesses there and hes like nar there was only 1.. so now iv lost the 2 guys that said i was in the right and theres some new witness

OK, some advice, call the cop shop that is dealing with it and ask to speak to the sgt. Explain the situation to them, they might be able to get to the bottom of it for you, tell them you need details for insurance perposes. Call TAC and find out if she has made a claim, because she would have needed all your details (and your cars details to do so). Then thirdly speak to your insurance company and see what they suggest. DON'T run straight to a laywer, that can look (if it gets that far and u already have representation) that you are guilty of something.

Mate your story is a shocker cant believe it man, I suppose this I what you call a genuine accident, it is a blessing you had ppl at the scene that can vouch for you because from I what ive been told its usually the driver that takes brunt of the blame . I can truly understand you not sleeping I have to admit I wouldn’t be able to do much at all after that. I hope that it works out for you and this lady , in all fairness pedestrians have the responsibility to look and take in consideration conditions of weather and driver stopping time.

best of luck with it

OK, some advice, call the cop shop that is dealing with it and ask to speak to the sgt. Explain the situation to them, they might be able to get to the bottom of it for you, tell them you need details for insurance perposes. Call TAC and find out if she has made a claim, because she would have needed all your details (and your cars details to do so). Then thirdly speak to your insurance company and see what they suggest. DON'T run straight to a laywer, that can look (if it gets that far and u already have representation) that you are guilty of something.

i wish it was that easy.. for starters because the cops havnt made a decision to who’s fault it was i cant ask for my car to be fixed.. 2nd she wouldnt have made a claim with the tac because shes saying she doesnt remember what happened and is hoping that the cops dick me for something and get her off.. 3rd i dont have insurance and even if I did they wouldnt do much for me anyway cos i would have only had 3rd party if i did have any as a 22yo driver in a import gets stupidly priced insurance

Okay, regarding insurance, heres what to do.

There is a repairer in Fairfield who will do this sort of shit for you, ie, have their lawyers get the money from the girl for the damage.

They will make the claim through themselves, quote the work and then basically sue the woman for the cash. All you have to do is take the car to them and talk to them about it. I can't give you there name here, but they are a prestige auto body repairer in fairfield. They do extremely good work and will handle everything.

Also, if she goes to sue you, make sure you counter sue.

All this said, again get legal advice first so you know your rights.

BASS OUT

DON'T run straight to a laywer, that can look (if it gets that far and u already have representation) that you are guilty of something.

HMMMM. Can't say I agreee although I do see the point. Fact is though with no insurance, not knowing what THE witness will say, indecisive coppers and a chick who remembers nothing - can legal advice really be such a bad idea?

Just coz u get some advice now doesn't mean ur guilty nor do u need to tell them that u've sought advice.

Bummer havin no car. You know how to get in touch if you need anything though.

Bummer havin no car. You know how to get in touch if you need anything though.

smoke signals? nar im still driving it around.. got a new windscreen and gaff’d the bar on and same with the mirror… its amazing what some gaff can do…

hey your car is the same colour :P wanna swap mirrors? While we’re at it can I borrow your sun roof too? :)

dean has 2nd hand head lights for $300 each and mirror's for $150 each rekon i could find cheaper? 300 for 2nd hand light sounds like a bit much ill still have to get them both cleaned up too

That's the going rate i'm afraid, you may find cheaper, if you get lucky. I reckon he may give you both for $400 if you were reffered by a forum member? give it a go :D

i got my mate to do the 1st phone call while i was at work and he's friends with him and also bought a tt supra off him..

anyways i bought them both.. headlight looks brand new and puts my other 1 to shame so i havnt put it in yet cos that headlight exchange place isnt open again till the 5th..

thanx for you help anyways now i just need another copy of your front bar and im close to back on the road again.. and for these cops to say it was her fault so i can see some money

There was only a crack in the bar wasn't there? that can be repaired fairly cheaply i would think ;) looking at the damage mabe the bumper support was not cut down and re fitted?

When you repair or replace be sure to fit the bumper support and the end plates to give it more strength, I spent an hour with a bloody hacksaw in the drive way to make sure the bumper had some metal behind it. Watch out for the bumper ripping tow truck drivers!! they quite often go "oh well it's broken any way" and do more damage!!

yeah i spoke to pulse tonight and they said they saw how much you cut off yours and they'll try and help me with mine when i get a new bar..

also that tow truck driver was shifty.. when it was going on and i was there watching he got the wooden planks out and made sure it would go up nice.. and i saw it go up didnt come close to touching anything.. he must of just rolled it straight off the back when no1 was around

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...