Jump to content
SAU Community

Recommended Posts

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

Yes Matty, try not to lap me more than twice per lap.

Me? Mate I has major traction issues... Even on semis!

PS: I want your roll cage... I see me axing it turn 3 or coming out of the esses...

Yah me and my mate will be coming to watch, unfortunately i lost my job recently so couldnt afford it. Cant wait to see some quick skylines going around. One day ill get the blue R33 out to a track day. We will be in my mates 32 taking some pics that ill try get up for you all.

Edited by Calsonic14U

yer we had fun even though we had problems. i blew a intercooler hose but i was able to fix it but by bro blew a big end bearing we think so after 3 sessions he was towed home :(

BUGGER, top day though even if it was cut short for me.

Oh well, Mark. Shame a $20 part can ruin a day, but at least you know you were setting some good times out there!

yer we had fun even though we had problems. i blew a intercooler hose but i was able to fix it but by bro blew a big end bearing we think so after 3 sessions he was towed home :thumbsup:

Yeah, that's gotta suck!

All in all, it looked like a good day, and as a spectator i had a pretty good time too! I'll be posting up some photos of Mark (mlr) and the two Matts (MBS206 and Cassbo), as well as a few other cars that caught my eye during the day, when I get a chance.




  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...