Jump to content
SAU Community

Recommended Posts

post-68456-1259336156_thumb.jpg post-68456-1259336738_thumb.jpg post-68456-1259336808_thumb.jpgim thinking VOLKGT30 OR RE30 these will look great on a gun metal gtr 32 , what do you all think. 19x9.5 or 18 x9.5 +30 offset ,colours are gun metal, gold, chrome , silver, magenta blue? Edited by blingtr
Link to comment
https://www.sau.com.au/forums/topic/298053-volk-gt30-re30-rims/
Share on other sites

You'll probably find a division between chunky/tuff spoke advocates Vs thin/artistic/covertly tuff spoke advocates.

All subjective really.

If you go chunky > TE37, Lenso D1R or GT-C

If it's slim/fine > RE30, GT30 or ADVAN RG

If I had your car in gun metal, I'd go Titanium RE30 = as I said, all subjective.

I'd talk to 'mxfly' - he knows more than I. Probably get you a great deal too.

Agreed with terry as I like dished out wheels, my opinion will vary, like I'd say no to the RMC Chrome rims...

What sort of spoke pattern are you after? 3,4,5, or 8+ spokes?

What colours suite the gunmetal 32's?

Do you want dish or just fixed to the edge of the lip?

Offsets what will work to push out the guards as 32's have great stance wouldn't want to mess up the offsets

xd9s also look fantastic on r32s

Agreed with ali, i've got a set of xd9's 18x10 +18 offset coming in next week $2500

this is what they look like on a white 32...just pretend the cars a bit lower, would probably look sweet, PM me if you want a set.

post-59566-1259468154_thumb.jpg

close up, they are called Work Emotion XD9 Colour (Madbray) which is a special order colour generally

post-59566-1259468181_thumb.jpg

Agreed with ali, i've got a set of xd9's 18x10 +18 offset coming in next week $2500

this is what they look like on a white 32...just pretend the cars a bit lower, would probably look sweet, PM me if you want a set.

post-59566-1259468154_thumb.jpg

close up, they are called Work Emotion XD9 Colour (Madbray) which is a special order colour generally

post-59566-1259468181_thumb.jpg

dude , you sold me they look great, nice dish , perfect size or did you need to roll guards. if they are a good fit im keen for a set ,how much inc delivery to panorama 5041 S.A are they through JDM .thanks !!!

Edited by blingtr
heres anoth pic with xd9s

in 18x10 +18

i think gun metal gun would look good on a grey 32

post-16324-1259491663_thumb.jpg

they look awesome ive also been lookin at work Emotion 11R in silver your right about the offset its gotta be 18+ i dont think 20+ fits ?

Dont about the others but personally I think 32 are more or a sleeker car comparing to the brothers and GTC will not look as good on them comparing to 33 or 34. 33 being the fatter/rounder one would suit the fatter spokes than 32s. And finally the 34, looks good in everything even though they're fat/big but somehow still manage to look sleek, maybe because they're not as "round".

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...