Jump to content
SAU Community

Recommended Posts

Basically my heater smells like urine...bad....the musky cat piss type of urine. Has anyone else had this or know how to fix it?

I would assume some sort of bacteria build up? It only smells with the aircon off, if i turn on the a/c then it doesn't smell but as soon as the a/c is off and its running off the fans/heater (regardless of temperature) it will stink.

Help pleaseee!

Cheers

Dom

I was also thinking cat piss hahahaha..... there are a few types of deoderiser you can get, but you may have to actually replace the piping in behind the dash if they don't help... :)

According to the R34 Owner's Manual (-yes there IS a genuine one in English)

...the "Air Ventilation Filter" is to be replaced every 20,000Km.

How to get at it, is in the R34 Workshop Manual (on SAU here via 'search' or on disk).

I'm going to try take the filter out to see if it is the problem, but can someone please tell me how to actually get to it?

I looked in the r34 workshop manual but it only says how to take the filter out....not where it actually is and i have no idea.

thanks

I'm going to try take the filter out to see if it is the problem, but can someone please tell me how to actually get to it?

I looked in the r34 workshop manual but it only says how to take the filter out....not where it actually is and i have no idea.

thanks

Behind the glovebox I beleive

  • 2 weeks later...
thanks for that, will check it out tomorrow =]

I want to check mine out also but the service manual looses me with the first removal instruction---

1/"remove the instrument lower assist panel"--i would absolutely love to --if only I knew WTF it actualy is .

2/"remove the clip and remove the cover" I still aint got past 1/

3/"Remove the deodorizing clean filter assembly from the blower and cooling unit"---farkit, I'm goling for a drink---.

how did you go with yours ? :)

I want to check mine out also but the service manual looses me with the first removal instruction---

1/"remove the instrument lower assist panel"--i would absolutely love to --if only I knew WTF it actualy is .

2/"remove the clip and remove the cover" I still aint got past 1/

3/"Remove the deodorizing clean filter assembly from the blower and cooling unit"---farkit, I'm goling for a drink---.

how did you go with yours ? :)

haha yeah I was like that at first, but eventually worked it out.

1. remove glove box. There are 2 sliding clips at the bottom of the box (stick head into the foot well to see them), you slide them and pull them out, that will let you take the glove box out. There is a retracting cable that is attached to the right hand side of the glove box, that needs to be slid off to let you remove the whole box.

2. remove all the screws behind the glove box, including the clip that the box grabs to in order to stay shut. Can't remember how many, probably 4 or so. This lets you take the whole panel off and reveals the aircon blower and filters.

3. locate the rectangle white plastic thing. there is a metal clip on the bottom, take that off. then slide the whole plastic thing up and that allows you to take if off.

4. now the white plastic rectangle thing is off, the filters are revealed.

unfortunately they weren't the source of my urine smelling heater :bunny:

haha yeah I was like that at first, but eventually worked it out.

unfortunately they weren't the source of my urine smelling heater :)

Thanks very much for that.

Mine smells like an oriental knocking shop , quite pleasant actualy , so I'm guessing that the filters were new in Japan before it was imported or were renewed by the dealer prior to it going on the yard, so it may have formally been a cats piss percy . What was the stinko with yours anyhew ?

How much were the replacement filters ? -if you don't mind me asking.

You could try spraying Glen 20 into the intake with the fan on full, if its fungal/bacterial thingo that may get it ? just a thought.

Edited by BASHO
  • 2 weeks later...

Hi, my mums car had the same prob.. I don't think it's bacteria problem n doubt it really is cat piss! It's the heater core, most likely leaking n will affect electricals too like cd player and etc.. Mist change asap before problem branches out. What ur smelling is actually the burning smell of leaves that actually got into ur engine bay which prob contains animals piss.. Let me guess, ull find it hard to get rid of mist from ur windscreen too? If yes then u r experiencing the same problem. Anyway I could b wrong but get it checked out soon..

So turns out that the source of the smell wasnt the filters and there isnt a problem with the heater core from what I can tell....this mystery continues =/

If i were to try and spray in some sort of glen 20 or disinfectant, where would I spray this? Maybe that will solve it...worth a try since we always have that stuff hanging around the house

So turns out that the source of the smell wasnt the filters and there isnt a problem with the heater core from what I can tell....this mystery continues =/

If i were to try and spray in some sort of glen 20 or disinfectant, where would I spray this? Maybe that will solve it...worth a try since we always have that stuff hanging around the house

Just guessin but you could maybe try taking out the filters, running the fan full tilt and spray the Glen 20 in the hole where the filters should be, I'd only be giving it a bit of a hit at a time just in case theres wireing / electricals that might not like getting soaked.

:(

Hey Dom, you spray ur disinfectant or scented spray in and around the intake vents on the scuttle panel, which is located at the bottom of the windsreen, below wiper arms

If that doesnt work, You can also try what they call an AC Bomb, which is a can of disinfectant which u place on the passenger floor mat and release the valve while having the car running with ac on recirc for 10mins or so. As the heater and ac use the same ducts. I t will kill any bacteria or smell in car, After the process has been done is has a sterilised clean smell.

A little random but does it go away after a while? I had a similar issue in the Ford and its actually something weird that someone put in the washer bottle that goes off, after using the washer on the windscreen a terrible smell comes through the vents of the car for ~5-10minutes then goes away.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
×
×
  • Create New...