Jump to content
SAU Community

Recommended Posts

black smoke is usually the car running rich, so hardly think it's blocked injectors

i'm no mechanic, but i'd start with the basic ...MAF, Timing, CAS

also check the spark plugs to identify any problems in any cylinders. a misfire in 1 cyl in a v6 is hardly noticable

could be a very slight seepage of engine oil to one spark plug causing weak sparking or unburnt fuel

BTW, there are 4 O2 sensor in our car. 2 before the cat, and 2 after. So which one did you change? Have you check your spark plugs? By looking at the plugs, you can tell what's happening to the combustion chamber. The tip should be clean with some grey deposit around the electrode. Search the web for other tell tail sign of problem in the chamber.

  • 12 years later...

Hi All. Im new Here. Just looking and do some digging’s on forums and I found this topic. Just want to ask if this problem has been sorted out. It’s looks like it have the same problems like my Elgrand E51 VQ35DE
Anybody have sort this problem out ?My VQ35 has same problems. Black smoke, no check engine lights, running rich high fuel consumption,looks like less power and starts and runs ok.
Thanks for anybody who can help me out. 

  

12 hours ago, Greg82 said:

I found the same problems there is no answer

Of course there's no answer. How can there be an answer on the internet for the specific problem that your car has. Your car will have one of the problems you find on the 'net. It will then be up to you to work out which one it actually is.

16 hours ago, Greg82 said:

Yes I did and always wen I found the same problems there is no answer just guessing and like here was the car sold. 

As above the low hanging fruit would most likely be afm, then maybe o2 sensors, sometimes if they 02s are just starting to go it might feel like the lost power kicks back sometimes  when accelerating, is it high ks? Get any better or worse as it warms up? 

VQ35 Elgrands mow gas at the best of times, also prone to chain issues so if ks are getting up pay to check how far the tensioner is out will give an idea if stretch is a becoming problem, I didn't read the whole thread so may have missed something from previous comments

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...