Jump to content
SAU Community

Recommended Posts

have just bought a r34 gtr which got damaged in transit by transport company,its covered by insurance but smash repairers need part numbers for quotes,the bottom upper part of the spoiler is nismo & the lower more damaged part is just stock standard i think,i was wondering if anybody knows the part numbers for both pieces or if not contact details for nismo,skyline gtr parts,etc.

post-68973-1260353944_thumb.jpg

post-68973-1260353975_thumb.jpg

post-68973-1260354007_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/299548-r34-gtr-front-spoiler/
Share on other sites

I had a book of GTR part numbers as I was looking to get a R34 GTR but settle for a R33 GTR...so I can't help you...however, just give Nissan Australia a call and they can give you the part number instantly over the phone from their parts database.

The NISSAN Paint Code for Bayside Blue = 'TV2'

I'm not sure yet whether my R34 Workshop Manual has the part #s

I'll need to check.

Methinks that transport driver needs to have his lips dragged across the edge of the ramp too...

The NISSAN Paint Code for Bayside Blue = 'TV2'

I'm not sure yet whether my R34 Workshop Manual has the part #s

I'll need to check.

Yeah, it's in there bro...you'll be able to help him.

Yeah, it's in there bro...you'll be able to help him.

thanks terry & spunky munky,ill wait to see what you come up with terry & your manual,if no go ill give nissan australia a ring,i agree terry those wharfees arent to be trusted!!!!

Heads up, your part is fibreglass, it should be plastic...

What is insurance covering, the replacement of the fibreglass part or plastic one?

I don't think the part number is any good to you.

the lower part is fibreglass,the nismo body kit part above it is plastic,insurance is covering what ever ill get replaced as they told me there is no insurance assessors in tassie to look at it so they just want 2 quotes but the 2 panel beaters dont know the part numbers,think ill just take car to nissan dealership & get parts man to look at it,cheers mate

  • 4 weeks later...

The part number for the front diffuser is 75890-AA410 and nissan call it a COVER-ENGINE LO if that helps the one you have is not standard as the orginal extends further back under the car and as said is not fibre glass , i dont have a part number for the lower lip section i think thats what you are referring to as the nismo part the lower peice that is painted blue correct? iam not to sure it is nismo as it looks exactly the same as a standard one to me other than it looks like fibre glass to me as well , several companies in japan do cheap knock offs of the standard gear so i would say the previous owner replaced them for what ever reason with cheaper parts instead of paying big dollars for the genuine nissan parts.

I would also check the front bar see if that is fibre glass or ABS plastic car may have had damage to the front end at some point

The part number for the front diffuser is 75890-AA410 and nissan call it a COVER-ENGINE LO if that helps the one you have is not standard as the orginal extends further back under the car and as said is not fibre glass , i dont have a part number for the lower lip section i think thats what you are referring to as the nismo part the lower peice that is painted blue correct? iam not to sure it is nismo as it looks exactly the same as a standard one to me other than it looks like fibre glass to me as well , several companies in japan do cheap knock offs of the standard gear so i would say the previous owner replaced them for what ever reason with cheaper parts instead of paying big dollars for the genuine nissan parts.

I would also check the front bar see if that is fibre glass or ABS plastic car may have had damage to the front end at some point

the upper part im told by nissan is factory which they can supply for $1300 & the very bottom part which is called a lower engine cover which is after market & i am getting that through power play imports in sydney for $1500,the whole body kit is fibre glass but the two new front parts will be abs plastic,the transport company are paying for it through their insurance,total cost quote from panel beater $3500,thanks for all your help,much appreciated.

  • 10 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...