Jump to content
SAU Community

Xado

GTRWAGON

By GTRWAGON,
in Four Door Family & Wagoneers

 Share

Recommended Posts

GTRWAGON Enthusiast

GTRWAGON

Posted
Posted

:D

Anyone familiar with this product?

XADO is NOT an oil additive. Though we describe the XADO Gels as an additive XADO does NOT change the characteristics or viscosity of the oil in any way, unlike other oil additives and fuel treatment which do. However, we do use the oil to initially DELIVER XADO to the moving parts.

Xado - Petrol Engine treatment

This is our top selling XADO Revitalizant engine treatment for Petrol engines. This product will increase the compression in your cylinders, increase horsepower, reduce fuel consumption, exhaust emissions and will restore your vehicle to a state better than new. If you have an old car, which is burning oil, or you are loosing horsepower, or just want to maximize the potential of your car's engine, this is the product for you. It is base on a revolutionary discovery of natural minerals that affect the surface of the friction pairs and it does not affect the engine oil. It is not just another oil additives, but it is rather a unique gel which restores the geometry and weight of the machine parts in the working mechanism.

XADO

I know there are a lot of snake oil products on the market these days. Is this just another? The science behind what they are saying makes scene, especially with older well used engines. Creating a protective coating against wear is all good, but is there any truth to it actually working? If its kosher, I'd use it. But its always best to see what others think.

Link to comment
https://www.sau.com.au/forums/topic/299660-xado/
Share on other sites
And Collaborator

And

Posted
Posted (edited)

I am.

This product uses patented technology (actually, particular mineral), patented by russians. Ukrainian company uses that technology, but there are some issues. Russians claim that they stopped supplying components to Ukrainians so they do something on their own, and results are unpredictable. XADO says nothing bout it.

Being fluent in russian, read ALOT of info about XADO, just spend few hours couple of weeks ago researching XADO. My ex brother in law was researching that stuff some time (4-5 years) ago, got in contact with people from XADO, they were very optimistic. I got XADO about 4 years ago, treated my camry sv21 and my stagea - engine, gearbox, power steering system. SV21 done about 400k , goes OK, original engine. Still got XADO tubes at home.

Well, there are DIFFERENT opinions about XADO on the forums. Some of them are VERY interesting, that stuff seems to be working (if you get real product), at least for engines. I can dig out some photos and publish them here if people want :D

Oh, and by the way - they charge arm and a leg here in AU, XADO is CHEAP in Ukraine. I mean - cheap, few bucks per tube or so (can find exact prices). If people want to go down that path, I can probably get in touch with some people from there and organize a group buy.

PS can provide more info, but tired of typing :( Welcome to PM me with ur number if interested.

Edited by And
Link to comment
https://www.sau.com.au/forums/topic/299660-xado/#findComment-4980619
Share on other sites
Oddy man Collaborator

Oddy man

Posted
Posted

I immediately shun ANY advertisement that uses incorrect spelling/grammar (Unless its engrish computer translation).

If people have a great product, it's worth it to have someone write it that can do it properly.

"...or you are LOOSING horsepower"

"It is BASE on"

Poor editing to me reflects poor work and lack of passion in what you do, and I won't have it.

Link to comment
https://www.sau.com.au/forums/topic/299660-xado/#findComment-4980799
Share on other sites
BensDR30 Experienced

BensDR30

Posted
Posted
I immediately shun ANY advertisement that uses incorrect spelling/grammar (Unless its engrish computer translation).

If people have a great product, it's worth it to have someone write it that can do it properly.

"...or you are LOOSING horsepower"

"It is BASE on"

Poor editing to me reflects poor work and lack of passion in what you do, and I won't have it.

:D

If you're going to sell a product in a country, then get the marketing language correct. I can't take a 'performance' product seriously when the manufacturer can't even articulate what their product does!

Link to comment
https://www.sau.com.au/forums/topic/299660-xado/#findComment-4984079
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Bwagz
      Engine model

      By Bwagz · Posted

      Thanks for that, hadn’t used my brain enough to think about that. 
    • MBS206
      R33 GTR running -9 with no tune

      By MBS206 · Posted

      Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Piggaz
      Garrett G Series

      By Piggaz · Posted

      Any G40/1000 or G40/1250 results out there?  
    • joshuaho96
      R33 GTR running -9 with no tune

      By joshuaho96 · Posted

      You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...