Jump to content
SAU Community

Recommended Posts

Hi All,

I have a 1990 r32 gtst with the nice rb20det. Now i was searching on the internet to find a nice metal headgasket. There's only one with i don't know and that the bore of the engine. All i can find that is 78,0mm. But all the headgaskets are 80.5mm or 83,5mm. Can anyone tell me which one i need?

Cheers Patrick.

Hey man. Here is some copy pasta from wiki. The URL http://en.wikipedia.org/wiki/Nissan_RB_engine

Bore and stroke

All Nissan engines follow a naming convention, identifying the engine family (in this case, RB), displacement, and features present- see the list of Nissan engines for detail.

The stock dimensions for the RB engines;

  • RB20 - 2.0 L (1998 cc, bore: 78.0 mm, stroke: 69.7 mm)
  • RB24 - 2.4 L (2428 cc, bore: 86.0 mm, stroke: 69.7 mm)
  • RB25 - 2.5 L (2498 cc, bore: 86.0 mm, stroke: 71.7 mm)
  • RB26 - 2.6 L (2568 cc, bore: 86.0 mm, stroke: 73.7 mm)
  • RB30 - 3.0 L (2962 cc, bore: 86.0 mm, stroke: 86.0 mm)

________________________________________________________________________________

__

Where have you looked to find only those sizes? Im not an RB20 person so don't quote me on anything. Like I said, straight copy pasta from wiki

Edited by Lukas 33

This is what ive found;

The following is intended for hcr32 and hnr32 owner or any car sporting the rb20det.

Vehicle model: hcr32 and hnr32

Engine type: rb20det

Displacement (cc): 1998

Combustion chamber: pent-roof type

Valve arrangement : DOHC belt drive

Bore x stroke mm: 78.0 x 69.7

Compression ratio : 8.5

Compression pressure: (kg / cm2) / (rpm) 12.0 / 300

Maximun output (net) (ps / rpm): 215 / 6400

Maximun torque (net) (kg-m / rpm): 27.0 / 3200

Fuel consumption ratio (g / GS.h) / (rpm): 215 / 2400

Dimensions m/t (l / w / h) (mm): 845x660x685

Dimensions a/t (l / w / h) (mm): 830x660x685

Idle speed (rpm): 800

Ignition timing a/t (BTDCdegrees / rpm): 15 / 650

Ignition timing m/t (BTDCdegrees / rpm): 20 / 650

Firing order: 1-5-3-6-2-4

Valve clearance cold (mm) intake: 0.45 +/- 0.003

Valve clearance cold (mm) exhaust: 0.38 +/- 0.003

Throttle chamber bolts torque setting (kg-m) first stage: 0.9 - 1.1

Throttle chamber bolts torque setting (kg-m) second stage: 1.8 - 2.2

Flywheel run-out limit (mm): 0.10

Con rod nut tightening stage 1 (kg-m): 2.3 - 2.9

Con rod nut tightening stage 2(kg-m): 3.9 - 4.5

That's the same as to above post. Also 78.0mm bore. So waht headgasket do i need than. I would think i need an 78.0mm headgasket but they are not for sale only the 80.5 and 83.5 for a rb20det.

chrs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...