Jump to content
SAU Community

Recommended Posts

Hi Guys,

Just spoke to one supplier "OF" Garrett turbos, enquiring about a GT25 "320hp" for the GTR. I asked if we could negotiate a better deal for the SAU members, He said, they would offer us a discount around 10%. They can supply us anyturbo by Garrett, you just need to let me know. I'm not a turbo guru so if anyone noes something I don't please let me know.

To give you an example the:

1. GT25 "320hp" Roller Bearing for the GTR was $1590 (inc Gst) less 10% = $1430 Inc GST

2. He also mention something about the turbo upgrade for a GTR by Garrett which where around $3100each?? Said something about being a direct replacement GT30, when compared to the GT25 was chalk and cheese. Couldthese be the same as gcg upgrade turbo http://www.gcg.com.au/catalogue/Tur...html#gtr_bolton

Any how if the prices are good & anyones interested, I will then set up a Group buy. I was thinking if this all works, & please, only if your serious. Rather than ring & hassle the compnay every minute with prices & specs. I would collate the specs & at the end of the day/week request the prices. Anyway, if anyone else can organise a better deal let me know cause I am after a set for my self.

- - - - - - - - - - - - - - - - - -

GT25 - $1430 (320hp)

GT28 - $1785 (350-390hp)

GT28 - $1850 (440-500hp)

GT30 - $1910

GT35/40 - $1910

All prices include GST & The turbos are brand new with standard manufactuers warranty

- - - - - - - - - - - - - - - - - -

Link to comment
https://www.sau.com.au/forums/topic/30086-turbos-any-model-garrett/
Share on other sites

I am chasing a turbine housing for a HKS GT30 turbo, but I need to know if the garrett turbine housing to suit GT30 will fit a 60mm major with 55mm exducer. Must be GT25 inlet with GT30 outlet too.

I was after a 0.73 AR, which garrett dont do (as its HKS),so I was wondering if you had contact details to I could find out compatibility/price for the garrett items? either that or if you could ask your contact?

Cheers

Steve

I am chasing a turbine housing for a HKS GT30 turbo, but I need to know if the garrett turbine housing to suit GT30 will fit a 60mm major with 55mm exducer.  Must be GT25 inlet with GT30 outlet too.  

I was after a 0.73 AR, which garrett dont do (as its HKS),so I was wondering if you had contact details to I could find out compatibility/price for the garrett items? either that or if you could ask your contact?  

Cheers

Steve

You may need to confirm for yourself whether Garrett make/have what your after. As for company details, I don't think they supply direct to public so other co's seling the garret may have an issue with some of the prices. Eg: Ray Halls.

I am chasing a turbine housing for a HKS GT30 turbo, but I need to know if the garrett turbine housing to suit GT30 will fit a 60mm major with 55mm exducer.  Must be GT25 inlet with GT30 outlet too.  

I was after a 0.73 AR, which garrett dont do (as its HKS),so I was wondering if you had contact details to I could find out compatibility/price for the garrett items? either that or if you could ask your contact?  

Cheers

Steve

Hi Steve,

I asked him about your request & he said yes they can, it would be around $500.

- also -

They don't make them in a 0.73 AR, he thinks only 0.64, 0.84 & 1~

hope that helps

Yep it does thanks alot.  Interesting that you can get a genuine HKS housing for a similar (or slightly lesser) amount by ordering direct from the US.

When are you planning to go ahead out of interest?

As soon as I can get some numbers <5 or more units, or within the next few weeks.

I am trying to arrange this as a permenant deal for SAU, but at this stage they say they need numbers before it can be permenant.

hey , since im really interested in this group buy , will the GT25 version..

are these the exact same response as the GT2530 by HKS ?? like same everything ? ..

did you read the thread "HKS vs Garrett" ? here's the link http://www.skylinesaustralia.com/forums/sh...ead.php?t=14183

Read it, you'll learnn alot & be very suprised at the results, sometimes you'll pay more just for the name.

Hi,

Whats the biggest garrett turbo that will bolt on to rb25det ?

i'll be in it :D

Hi Cameron,

I wouldn't know, as I said in my original post, I'm not a turbo expert. I've just been able to land a good deal for the forum. I'd suggest to first enquire with turbo specialists, or tuners about your turbo options, then let me know which model you want.

meshmesh

Any more news... how many people do you still need?

I'm still after the GT30.

But after looking at GCG's website...

they have the GT30 down at a price of 2960.00

Any ideas what is going on there???

2.9k is a bit rich... but then, at a price of 1,900 for SAU, that is a FAIR bit more than a 10% discount me thinks.

Please clarify.

thanks,

ash

Any more news... how many people do you still need?

I'm still after the GT30.

But after looking at GCG's website...  

they have the GT30 down at a price of 2960.00  

Any ideas what is going on there???

2.9k is a bit rich... but then, at a price of 1,900 for SAU, that is a FAIR bit more than a 10% discount me thinks.

Please clarify.

thanks,

ash

Is that this one?

http://www.gcg.com.au/catalogue/Turbos%20-..._bearing.html#4

There are a lot of different compressor/turbine wheel and housing combos, there are 9 GT30's on Ray Halls site alone. The GCG one is a 550-600hp one, so you need to find out what parts the $1900 one is made from and what it's rated to.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...