Jump to content
SAU Community

! For Sale - My 2002 Mines R34 M Spec Nur Gtr !

R34GTRMSpecNUR
 Share

Recommended Posts

R34GTRMSpecNUR Contributor

R34GTRMSpecNUR

Posted
Posted

Hi Guys,

Usual story - baby on the way, need bigger house, toys must go. My Nur is 1 of only 250 ever built. It was purchased brand new by a Kiwi who had it sent directly to Mines from factory for tuning. Including the original cost of the car, it's had NZ$350k spent on it and arguably sports the best of everything.

http://www.trademe.co.nz/Browse/Listing.aspx?id=259634078

Will be very sorry to see it go. I can be contacted via [email protected] or +64 21 227 4001

Cheers

Phil

JesseJames Apprentice

JesseJames

Posted
Posted (edited)
115k landed registered and complied in australia?

mate he'd be losing about $65K if he did this for someone. I'm guessing that $115K is the asking price ex-NZ, which means $11.5K duty, plus shipping and handling, app $13K GST, and then (due to the price) about $25K in luxury car tax (30% of the excess over $60K). This is $165K already, and then probably another $5K for compliance (a lot of parts need to be taken on and off, and stock parts fitted temporarily), then your on roads will cost about $6K due to stamp duty (3-4% in most places). All up this is an on-road cost of about $180K drive away. I may be wrong (this is off the top of my head), but I think these numbers are pretty close. So I doubt he's gonna shave $65K off just for you! Sadly, whilst this is just a supreme car, sometimes regulatory (and tax) limitations associated with importing just make certain deals not viable.

Edited by JesseJames
sebastion Proficient

sebastion

Posted
Posted
That's correct guys - price is AUD$115k.

Thanks

Phil

thats an absolute bargin mate... wish we had the money... and also for those that may not know, he is selling the car with its original NUR motor (it has a new one in it), so you get a complete collector car and another engine...

good luck with it mate, should have no issues

arabian_drifter Community Regular

arabian_drifter

Posted
Posted
mate he'd be losing about $65K if he did this for someone. I'm guessing that $115K is the asking price ex-NZ, which means $11.5K duty, plus shipping and handling, app $13K GST, and then (due to the price) about $25K in luxury car tax (30% of the excess over $60K). This is $165K already, and then probably another $5K for compliance (a lot of parts need to be taken on and off, and stock parts fitted temporarily), then your on roads will cost about $6K due to stamp duty (3-4% in most places). All up this is an on-road cost of about $180K drive away. I may be wrong (this is off the top of my head), but I think these numbers are pretty close. So I doubt he's gonna shave $65K off just for you! Sadly, whilst this is just a supreme car, sometimes regulatory (and tax) limitations associated with importing just make certain deals not viable.

wat did u just dribble man .

R34GTRMSpecNUR Contributor

R34GTRMSpecNUR

Posted
  • Author
Posted
mate he'd be losing about $65K if he did this for someone. I'm guessing that $115K is the asking price ex-NZ, which means $11.5K duty, plus shipping and handling, app $13K GST, and then (due to the price) about $25K in luxury car tax (30% of the excess over $60K). This is $165K already, and then probably another $5K for compliance (a lot of parts need to be taken on and off, and stock parts fitted temporarily), then your on roads will cost about $6K due to stamp duty (3-4% in most places). All up this is an on-road cost of about $180K drive away. I may be wrong (this is off the top of my head), but I think these numbers are pretty close. So I doubt he's gonna shave $65K off just for you! Sadly, whilst this is just a supreme car, sometimes regulatory (and tax) limitations associated with importing just make certain deals not viable.

I recently had an Aussie GTR enthusiast who was wanting to buy the Nur look into these costs and he concluded that all up it would be an additional AUD$20k.

Also, easy enough to minimise the duty obligations.

R34GTRMSpecNUR Contributor

R34GTRMSpecNUR

Posted
  • Author
Posted
thats an absolute bargin mate... wish we had the money... and also for those that may not know, he is selling the car with its original NUR motor (it has a new one in it), so you get a complete collector car and another engine...

good luck with it mate, should have no issues

Thanks mate. Not only is it the rarest of the Nurs, but it's also been tuned by the legendary Mines company in Japan. For me, this just adds to its collectibility.

Considering the cost of a new R35, it is a bargin. All the money has been spent so the car is like new. Given its rare and collectable nature, it will likely appreciate over the years and will always appeal to the global car enthusiast market.

As you can see in the following link, a tuned GTR (R33 or R34) can still walk a new R35 around the track and my Nur has over 700hp.

Cheers

Phil

andz Mentor

andz

Posted
Posted
As you can see in the following link, a tuned GTR (R33 or R34) can still walk a new R35 around the track and my Nur has over 700hp.

prob a stock R35

*Xmas bump for a nice nur*

  • 2 weeks later...
R34GTRMSpecNUR Contributor

R34GTRMSpecNUR

Posted
  • Author
Posted
prob a stock R35

*Xmas bump for a nice nur*

Thanks. For those interested, I took a few clips of my GTR recently. You can check them out here.

Enjoy

R34GTRMSpecNUR Contributor

R34GTRMSpecNUR

Posted
  • Author
Posted

This was a once off - the only time I've ever launched it. 0-100 in under 4

http://www.youtube.com/watch?v=-HIBfsP1Fow

  • 1 month later...
R34GTRMSpecNUR Contributor

R34GTRMSpecNUR

Posted
  • Author
Posted

Hey guys - baby due any day now. Car has to go to make way for a new family wagon.

Have reduced price from AUD $115 to just $95K!! Just had oil changed also.

Anyone interested, please call on +64 21 227 4001

32godzilla Proficient

32godzilla

Posted
Posted

I think I'd rather chop an arm off than sell that! THE best 34 GTR I've ever seen (these 3 pics below have been my wallpaper(s) for about a year!)

gtr_nur_1.jpg

gtr_nur_2.jpg

gtr_nur_3.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 persistent issues. P/steering and lag/misfire

      By GTSBoy · Posted

      Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • Kapr
      Freddy Plenum vs Genuine options RB25

      By Kapr · Posted

      @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Dose Pipe Sutututu
      Neil's R33 Gts-t Build

      By Dose Pipe Sutututu · Posted

      Holy shit... wow!!! I totally missed this
    • MBS206
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By MBS206 · Posted

      One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...