Jump to content
SAU Community

Recommended Posts

225/50/r16

r32 gtr wheels and tyres

they are in good condition, just little chips.

2 tyres are new,

2 tyres have about 40% tread

grey in colour

$500firm

st albans, melbourne, western suburbs

post-64915-1261540419_thumb.jpg

post-64915-1261540461_thumb.jpg

post-64915-1261540498_thumb.jpg

post-64915-1261540597_thumb.jpg

post-64915-1261540646_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/301212-r32-gtr-rims/
Share on other sites

on the back thers lots of riting, i dont no whats what

91/7 , 1/21 , 17 , 15 , Sk20 , 39 , O4UOO , thats what it sais on the back, they came of a r32 gtr?? any1 no if they are gtr wheels, im pretty shore they are, my standard rims are 205/55/16 the gtr rims are 225/50/16

???? they both look the same just different colour, the gtr rims are grey, my standard ones are black

Edited by boz_soljah
Link to comment
https://www.sau.com.au/forums/topic/301212-r32-gtr-rims/#findComment-5002594
Share on other sites

yep those aren't gtr wheels at all.

they are alot more concave. 225/50r16 is a tyre size...not wheel size.

pretty sure it has the size and offset on the front of the wheel along the edge.

so in this case around $150 for these.

Link to comment
https://www.sau.com.au/forums/topic/301212-r32-gtr-rims/#findComment-5003120
Share on other sites

Look to see if it says 16x6.5jj or 16x8jj and that will confirm it mate.

They do look like GTSt rims though.

they say 16x6.5jj so they are gtst :S why were they on a gtr :S hmm, sumfin shifty wid old oner Lol

Link to comment
https://www.sau.com.au/forums/topic/301212-r32-gtr-rims/#findComment-5004369
Share on other sites

225/50/r16

THEY ARE GTST RIMS. NOT GTR, my bad

they are in good condition, just little chips.

2 tyres are new,

2 tyres have about 40% tread

grey in colour

$200

st albans, melbourne, western suburbs

Link to comment
https://www.sau.com.au/forums/topic/301212-r32-gtr-rims/#findComment-5004511
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...